[Sun Aug 19 10:39:00 2012] Detection parameters:
  Position = (333.2, 341.7) = 18 36 18.41 -23 52 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.0 +/- 17.5
  Background counts = 69.1
  Rate = 0.005 +/- 0.0007

[Sun Aug 19 10:39:00 2012] Off-axis axis estimate = 4.02'
[Sun Aug 19 10:44:21 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 10:44:21 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Aug 19 10:44:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Aug 19 10:44:21 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.44"
[Sun Aug 19 12:16:39 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19.ximg exists
[Sun Aug 19 12:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19.csv
[Sun Aug 19 12:16:39 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Aug 19 12:16:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19.csv
[Sun Aug 19 12:16:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 12:16:39 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Aug 19 12:16:40 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Aug 19 12:16:40 2012] Fit fullrun_pn_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Aug 19 13:15:42 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.297444 pixels away
[Sun Aug 19 13:15:42 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 13:15:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 13:15:42 2012] Assessing source extent using major
[Sun Aug 19 13:15:42 2012] Source does appear to be extended
[Sun Aug 19 13:15:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 13:16:06 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:16:06 2012] Initial guess for spatial extent in simple fitting = 8.44"
[Sun Aug 19 13:16:06 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.049
[Sun Aug 19 13:16:06 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.44"
[Sun Aug 19 14:28:40 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Aug 19 14:28:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17.csv
[Sun Aug 19 14:28:40 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Aug 19 14:28:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17.csv
[Sun Aug 19 14:28:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:28:40 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Aug 19 14:28:40 2012] fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Aug 19 14:28:40 2012] Fit fullrun_pn_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Aug 19 15:25:15 2012] Spatial fit model total counts = 600.998000, observed total counts = 601.000000
[Sun Aug 19 15:25:15 2012] Offset between fit and detection position for source 19 = 0.160253 pixels
[Sun Aug 19 15:25:15 2012] 601.599400 total counts/ 538.416000 bgd. counts: snr = 2.722977
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.160253 pixels
  Position = (333.0, 341.6) = 18 36 18.45 -23 52 20.4
  Extent = 4.7 (3.7-6.7)", rotation angle = 0
  Source counts = 63.2 +/- 24.5
  Background counts = 538.4
  Rate = 0.003 +/- 0.001
[Sun Aug 19 15:25:15 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 15:25:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 15:25:15 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 15:25:15 2012] Source does appear to be extended
[Sun Aug 19 15:25:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 15:25:38 2012] XMMSAS src. selection expression = ellipse(28926.835080, 29673.027600, 280.361408, 280.361408, 0.000000, X, Y)
[Sun Aug 19 15:25:38 2012] Writing source region out to fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19_src.reg
[Sun Aug 19 15:25:38 2012] Extracting stamp from image fullrun_pn_xmm0112220201_pi300-10000_cl_sm2.00.img.gz, (317, 326) - (349, 358)
[Sun Aug 19 15:25:38 2012] XMMSAS bgd. selection expression = annulus(28926.835080, 29673.027600, 467.269013, 934.538027, X, Y) && !ellipse(29765.155853, 31246.898499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.294464, 28067.344269, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 19 15:25:38 2012] Writing fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19.gif
[Sun Aug 19 15:41:51 2012] Mean detx,y = (1880.35, -2332.91) 
[Sun Aug 19 15:41:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 15:42:18 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 15:42:19 2012] Setting source spectrum file to fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 19 15:42:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Aug 19 16:06:51 2012] Not generating rmf since there are only 63 counts
[Sun Aug 19 16:06:51 2012] rmf not generated due to insufficient counts
[Sun Aug 19 16:46:46 2012] Updating aperture counts using extracted products
[Sun Aug 19 16:46:46 2012] Error reading totcts from fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 19 16:46:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 16:46:48 2012] Using photon index=1.80, rate=0.00291, arf fullrun_pn_xmm0112220201_pi300-10000_pass1_cl_src19.arf
[Sun Aug 19 16:46:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 16:46:48 2012] Updating source flux to 1.1e-14
[Sun Aug 19 16:47:31 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting