[Sun Aug 19 10:39:27 2012] Detection parameters:
  Position = (381.9, 298.7) = 18 36 2.94 -23 55 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.4 +/- 16.1
  Background counts = 66.3
  Rate = 0.003 +/- 0.0006

[Sun Aug 19 10:39:27 2012] Off-axis axis estimate = 6.05'
[Sun Aug 19 12:16:40 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 12:16:40 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sun Aug 19 12:16:40 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.049
[Sun Aug 19 12:16:40 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.45"
[Sun Aug 19 12:38:11 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7.ximg exists
[Sun Aug 19 12:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7.csv
[Sun Aug 19 12:38:11 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Aug 19 12:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7.csv
[Sun Aug 19 12:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 12:38:11 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Aug 19 12:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 19 12:38:11 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Aug 19 12:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Aug 19 12:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:15:46 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.900147 pixels away
[Sun Aug 19 13:15:46 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 13:15:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 13:15:46 2012] Assessing source extent using major
[Sun Aug 19 13:15:46 2012] Source does appear to be extended
[Sun Aug 19 13:15:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 14:28:40 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 14:28:40 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sun Aug 19 14:28:40 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.049
[Sun Aug 19 14:28:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.45"
[Sun Aug 19 14:50:26 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7.ximg exists
[Sun Aug 19 14:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7.csv
[Sun Aug 19 14:50:26 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Aug 19 14:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7.csv
[Sun Aug 19 14:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:50:26 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Aug 19 14:50:26 2012] fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Aug 19 14:50:26 2012] Fit fullrun_mos1_xmm0112220201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Aug 19 15:25:18 2012] Spatial fit model total counts = 212.001000, observed total counts = 197.000000
[Sun Aug 19 15:25:18 2012] Offset between fit and detection position for source 9 = 0.267125 pixels
[Sun Aug 19 15:25:18 2012] 207.114700 total counts/ 165.993000 bgd. counts: snr = 3.191730
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.267125 pixels
  Position = (382.0, 299.0) = 18 36 2.91 -23 55 25.8
  Extent = 3.9 (3.0-5.2)", rotation angle = 0
  Source counts = 41.1 +/- 14.4
  Background counts = 166.0
  Rate = 0.002 +/- 0.0006
[Sun Aug 19 15:25:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 15:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 15:25:18 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 15:25:18 2012] Source does appear to be extended
[Sun Aug 19 15:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 16:16:28 2012] XMMSAS src. selection expression = ellipse(33186.602588, 25962.536800, 232.109407, 232.109407, 0.000000, X, Y)
[Sun Aug 19 16:16:28 2012] Writing source region out to fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9_src.reg
[Sun Aug 19 16:16:28 2012] Extracting stamp from image fullrun_mos1_xmm0112220201_pi300-10000_cl_sm2.00.img.gz, (369, 286) - (395, 312)
[Sun Aug 19 16:16:28 2012] XMMSAS bgd. selection expression = annulus(33186.602588, 25962.536800, 386.849011, 773.698022, X, Y)
[Sun Aug 19 16:16:28 2012] Writing fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9.gif
[Sun Aug 19 16:18:36 2012] Mean detx,y = (-1193.14, 5905.05) 
[Sun Aug 19 16:18:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 16:19:01 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 16:19:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Aug 19 16:19:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Aug 19 16:25:39 2012] Not generating rmf since there are only 41 counts
[Sun Aug 19 16:25:39 2012] rmf not generated due to insufficient counts
[Sun Aug 19 16:46:49 2012] Updating aperture counts using extracted products
[Sun Aug 19 16:46:49 2012] Error reading totcts from fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Aug 19 16:46:50 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 16:46:50 2012] Using photon index=1.80, rate=0.00173, arf fullrun_mos1_xmm0112220201_pi300-10000_pass1_cl_src9.arf
[Sun Aug 19 16:46:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 16:46:50 2012] Updating source flux to 3e-14
[Sun Aug 19 16:46:53 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting