[Wed May 22 03:24:14 2013] Detection parameters:
  Position = (295.0, 270.2) = 13 26 49.54 -47 32 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.8 +/- 17.3
  Background counts = 79.5
  Rate = 0.004 +/- 0.0006

[Wed May 22 03:24:15 2013] Off-axis axis estimate = 2.06'
[Wed May 22 03:29:40 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed May 22 03:29:40 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Wed May 22 03:29:40 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Wed May 22 03:29:40 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 7.46"
[Wed May 22 05:03:51 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45.ximg exists
[Wed May 22 05:03:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45.csv
[Wed May 22 05:03:51 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed May 22 05:03:51 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45.csv
[Wed May 22 05:03:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 05:03:52 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed May 22 05:03:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed May 22 05:03:52 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed May 22 05:03:52 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed May 22 05:03:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 07:25:59 2013] Source 47 is offset by 0.945676 and 4.257267 pixels which is larger than
2 X fitted extent = 3.068952 x 3.068952, not incorporating fit results
[Wed May 22 07:25:59 2013] Vigneting correction estimate = 1.000000
[Wed May 22 07:25:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 07:25:59 2013] Assessing source extent using major
[Wed May 22 07:25:59 2013] Source does appear to be extended
[Wed May 22 07:25:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 07:25:59 2013] Source is confused with source 46
[Wed May 22 07:26:37 2013] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed May 22 07:26:37 2013] Initial guess for spatial extent in simple fitting = 7.46"
[Wed May 22 07:26:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Wed May 22 07:26:37 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 7.46"
[Wed May 22 09:07:29 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43.ximg exists
[Wed May 22 09:07:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43.csv
[Wed May 22 09:07:29 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed May 22 09:07:29 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43.csv
[Wed May 22 09:07:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 09:07:30 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed May 22 09:07:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 22 09:07:30 2013] fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed May 22 09:07:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 22 09:07:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 11:02:54 2013] Source 47 is offset by 8.682060 and 0.863542 pixels which is larger than
2 X fitted extent = 0.835218 x 4.203637, not incorporating fit results
[Wed May 22 11:02:54 2013] Spatial fit model total counts = -127.419000, observed total counts = 891.000000
[Wed May 22 11:02:54 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 11:02:54 2013] Vigneting correction estimate = 1.000000
[Wed May 22 11:02:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 11:02:54 2013] Assessing source extent using major
[Wed May 22 11:02:54 2013] Source does appear to be extended
[Wed May 22 11:02:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 11:03:22 2013] XMMSAS src. selection expression = ellipse(25616.529205, 23462.902191, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 11:03:22 2013] Writing source region out to fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_src.reg
[Wed May 22 11:03:22 2013] Extracting stamp from image fullrun_pn_xmm0112220101_pi300-10000_cl_sm2.00.img.gz, (258, 233) - (333, 308)
[Wed May 22 11:03:22 2013] XMMSAS bgd. selection expression = annulus(25616.529205, 23462.902191, 1087.500000, 2175.000000, X, Y) && !ellipse(25746.997345, 24504.887024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26755.778381, 23166.011505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28083.624200, 25040.216400, 324.054409, 324.054409, 0.000000, X, Y) && !ellipse(25509.005829, 23946.268860, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 11:03:22 2013] Writing fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47.gif
[Wed May 22 11:50:39 2013] Mean detx,y = (-2757.36, 3233.95) 
[Wed May 22 11:50:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 11:51:08 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 11:51:08 2013] Setting source spectrum file to fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May 22 11:51:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed May 22 12:40:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 12:40:41 2013] rmf not generated due to insufficient counts
[Wed May 22 14:00:44 2013] Updating aperture counts using extracted products
[Wed May 22 14:00:44 2013] Total counts from fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 646.00
[Wed May 22 14:00:44 2013] Total counts from fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_bgd.pi.gz = 2940.00
[Wed May 22 14:00:44 2013] Got source and background scale factors 1150342.000000, 7170742.000000
[Wed May 22 14:00:44 2013] User source parameters:
  Position = (295.0, 270.2) = 13 26 49.54 -47 32 12.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 174.4 +/- 26.4
  Background aperture counts = 471.6
  Rate = 0.005 +/- 0.0007

[Wed May 22 14:00:44 2013] Updating counts from extracted products
[Wed May 22 14:00:44 2013] Set source signif. to 174.36/21.72 = 8.03
[Wed May 22 14:00:46 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 14:00:46 2013] Using photon index=1.80, rate=0.00472, arf fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47.arf
[Wed May 22 14:00:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 14:00:46 2013] Updating source flux to 1.9e-14
[Wed May 22 14:01:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 14:01:17 2013] xmm0112220101/analysis//spectral/fullrun_pn_xmm0112220101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete