[Wed May 22 03:25:06 2013] Detection parameters:
  Position = (247.0, 253.7) = 13 27 10.17 -47 33 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 10.9
  Background counts = 20.3
  Rate = 0.002 +/- 0.0004

[Wed May 22 03:25:07 2013] Off-axis axis estimate = 4.94'
[Wed May 22 05:03:52 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Wed May 22 05:03:52 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Wed May 22 05:03:52 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Wed May 22 05:03:52 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.90"
[Wed May 22 06:19:23 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 22 06:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27.csv
[Wed May 22 06:19:23 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 22 06:19:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27.csv
[Wed May 22 06:19:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 06:19:24 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 22 06:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 22 06:19:24 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 22 06:19:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 22 06:19:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 07:26:08 2013] Warning, spatial fit 27 centroid is now closest to src. 27
[Wed May 22 07:26:08 2013] Vigneting correction estimate = 1.000000
[Wed May 22 07:26:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 07:26:08 2013] Assessing source extent using major
[Wed May 22 07:26:08 2013] Source does appear to be extended
[Wed May 22 07:26:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 09:07:30 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Wed May 22 09:07:30 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Wed May 22 09:07:30 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.157
[Wed May 22 09:07:30 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.90"
[Wed May 22 10:06:40 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27.ximg exists
[Wed May 22 10:06:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27.csv
[Wed May 22 10:06:40 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed May 22 10:06:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27.csv
[Wed May 22 10:06:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:06:40 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed May 22 10:06:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed May 22 10:06:40 2013] fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May 22 10:06:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed May 22 10:06:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112220101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 11:03:03 2013] Warning, spatial fit 27 centroid is now closest to src. 27
[Wed May 22 11:03:03 2013] Vigneting correction estimate = 1.000000
[Wed May 22 11:03:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 11:03:03 2013] Assessing source extent using major
[Wed May 22 11:03:03 2013] Source does appear to be extended
[Wed May 22 11:03:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 12:43:17 2013] XMMSAS src. selection expression = ellipse(21441.604492, 22025.718903, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 12:43:17 2013] Writing source region out to fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_src.reg
[Wed May 22 12:43:17 2013] Extracting stamp from image fullrun_mos1_xmm0112220101_pi300-10000_cl_sm2.00.img.gz, (210, 216) - (285, 291)
[Wed May 22 12:43:17 2013] XMMSAS bgd. selection expression = annulus(21441.604492, 22025.718903, 1087.500000, 2175.000000, X, Y) && !ellipse(21132.069229, 22823.549896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20899.078600, 20133.805400, 378.538411, 339.557610, 77.708358, X, Y)
[Wed May 22 12:43:17 2013] Writing fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29.gif
[Wed May 22 12:54:26 2013] Mean detx,y = (-1952.03, -7297.29) 
[Wed May 22 12:54:27 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 12:54:50 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 12:54:51 2013] Setting source spectrum file to fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 22 12:54:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 22 13:22:31 2013] Not generating rmf since there are only 55 counts
[Wed May 22 13:22:31 2013] rmf not generated due to insufficient counts
[Wed May 22 14:00:50 2013] Updating aperture counts using extracted products
[Wed May 22 14:00:51 2013] Total counts from fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 182.00
[Wed May 22 14:00:51 2013] Total counts from fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 948.00
[Wed May 22 14:00:51 2013] Got source and background scale factors 1161182.000000, 9164948.000000
[Wed May 22 14:00:51 2013] User source parameters:
  Position = (247.0, 253.7) = 13 27 10.17 -47 33 22.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 61.9 +/- 14.5
  Background aperture counts = 120.1
  Rate = 0.002 +/- 0.0004

[Wed May 22 14:00:51 2013] Updating counts from extracted products
[Wed May 22 14:00:51 2013] Set source signif. to 61.89/10.96 = 5.65
[Wed May 22 14:00:53 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 14:00:53 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29.arf
[Wed May 22 14:00:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 14:00:53 2013] Updating source flux to 2.6e-14
[Wed May 22 14:01:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 14:01:07 2013] xmm0112220101/analysis//spectral/fullrun_mos1_xmm0112220101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete