[Fri Dec 23 02:05:34 2011] Detection parameters:
  Position = (204.1, 213.1) = 11 39 34.12 -37 48 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.7 +/- 10.1
  Background counts = 12.5
  Rate = 0.02 +/- 0.004

[Fri Dec 23 02:05:34 2011] Off-axis axis estimate = 9.23'
[Fri Dec 23 02:06:09 2011] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:06:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 02:06:09 2011] Initial guess for spatial extent in simple fitting = 11.04"
[Fri Dec 23 02:06:09 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.975
[Fri Dec 23 02:06:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.04"
[Fri Dec 23 02:06:10 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 23 02:06:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 02:06:10 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 23 02:06:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 02:06:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 02:06:10 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 23 02:06:10 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 23 02:06:10 2011] Fit fullrun_mos2_xmm0112210501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 23 02:06:35 2011] Spatial fit model total counts = 52.951900, observed total counts = 53.000000
[Fri Dec 23 02:06:35 2011] Offset between fit and detection position for source 6 = 0.275897 pixels
[Fri Dec 23 02:06:35 2011] 51.277400 total counts/ 24.818400 bgd. counts: snr = 5.311125
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.275897 pixels
  Position = (204.2, 212.8) = 11 39 34.06 -37 48 48.6
  Extent = 5.1 (3.1-7.4)", rotation angle = 0
  Source counts = 26.5 +/- 7.2
  Background counts = 24.8
  Rate = 0.01 +/- 0.003
[Fri Dec 23 02:06:35 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 02:06:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 02:06:35 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 02:06:35 2011] Source does appear to be extended
[Fri Dec 23 02:06:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:06:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 02:06:57 2011] Initial guess for spatial extent in simple fitting = 5.10"
[Fri Dec 23 02:06:57 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.804
[Fri Dec 23 02:06:57 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.10"
[Fri Dec 23 02:06:58 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Dec 23 02:06:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 02:06:58 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Dec 23 02:06:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3.csv
[Fri Dec 23 02:06:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 02:06:58 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Dec 23 02:06:58 2011] fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Dec 23 02:06:58 2011] Fit fullrun_mos2_xmm0112210501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Dec 23 02:07:22 2011] Spatial fit model total counts = 52.952600, observed total counts = 53.000000
[Fri Dec 23 02:07:22 2011] Offset between fit and detection position for source 6 = 0.003244 pixels
[Fri Dec 23 02:07:22 2011] 51.276200 total counts/ 24.923700 bgd. counts: snr = 5.278561
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.003244 pixels
  Position = (204.2, 212.8) = 11 39 34.06 -37 48 48.6
  Extent = 5.1 (3.1-8.1)", rotation angle = 0
  Source counts = 26.4 +/- 7.2
  Background counts = 24.9
  Rate = 0.01 +/- 0.003
[Fri Dec 23 02:07:22 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 02:07:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 02:07:22 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 02:07:22 2011] Source does appear to be extended
[Fri Dec 23 02:07:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 02:07:22 2011] Deleting source due to low Poisson probability 0.9