[Thu Sep 29 10:24:48 2011] Detection parameters:
  Position = (260.1, 210.1) = 11 39 14.20 -37 49 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.5 +/- 15.3
  Background counts = 13.1
  Rate = 0.005 +/- 0.0005

[Thu Sep 29 10:24:48 2011] Off-axis axis estimate = 6.98'
[Thu Sep 29 11:23:32 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 11:23:32 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Sep 29 11:23:32 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Sep 29 11:23:32 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 9.92"
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12.csv
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12.csv
[Thu Sep 29 14:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 29 14:10:23 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Sep 29 14:10:37 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 13.478981 pixels away
[Thu Sep 29 14:10:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:37 2011] Assessing source extent using major
[Thu Sep 29 14:10:37 2011] Source does appear to be extended
[Thu Sep 29 14:10:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:38:31 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:38:31 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Sep 29 14:38:31 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Thu Sep 29 14:38:31 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 9.92"
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12.csv
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12.csv
[Thu Sep 29 17:52:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep 29 17:52:56 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Sep 29 17:53:01 2011] Spatial fit model total counts = 241.999000, observed total counts = 242.000000
[Thu Sep 29 17:53:01 2011] Offset between fit and detection position for source 40 = 0.085988 pixels
[Thu Sep 29 17:53:01 2011] 244.917800 total counts/ 151.500000 bgd. counts: snr = 7.589677
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.085988 pixels
  Position = (260.1, 210.2) = 11 39 14.17 -37 49 5.0
  Extent = 4.7 (4.0-5.7)", rotation angle = 0
  Source counts = 93.4 +/- 15.6
  Background counts = 151.5
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 17:53:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 17:53:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 17:53:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 17:53:01 2011] Source does appear to be extended
[Thu Sep 29 17:53:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:06:56 2011] XMMSAS src. selection expression = ellipse(22582.679640, 18238.134800, 281.271008, 281.271008, 0.000000, X, Y)
[Thu Sep 29 19:06:56 2011] Writing source region out to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40_src.reg
[Thu Sep 29 19:06:56 2011] Extracting stamp from image fullrun_mos2_xmm0112210101_pi300-10000_cl_sm2.00.img.gz, (244, 194) - (276, 226)
[Thu Sep 29 19:06:56 2011] XMMSAS bgd. selection expression = annulus(22582.679640, 18238.134800, 468.785013, 937.570027, X, Y)
[Thu Sep 29 19:06:56 2011] Writing fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40.gif
[Thu Sep 29 19:12:04 2011] Mean detx,y = (-4881.67, 4131.24) 
[Thu Sep 29 19:12:05 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 19:12:09 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 19:12:09 2011] Setting source spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Sep 29 19:12:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Sep 29 19:26:57 2011] Not generating rmf since there are only 93 counts
[Thu Sep 29 19:26:57 2011] rmf not generated due to insufficient counts
[Thu Sep 29 19:47:53 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Sep 29 19:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:47:53 2011] Using photon index=1.80, rate=0.00249, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src40.arf
[Thu Sep 29 19:47:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:47:53 2011] Updating source flux to 4.3e-14
[Thu Sep 29 19:48:08 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting