[Thu Sep 29 10:24:48 2011] Detection parameters:
  Position = (311.9, 234.3) = 11 38 55.15 -37 47 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.4 +/- 11.0
  Background counts = 18.6
  Rate = 0.001 +/- 0.0004

[Thu Sep 29 10:24:48 2011] Off-axis axis estimate = 4.75'
[Thu Sep 29 11:23:32 2011] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 11:23:32 2011] Initial guess for spatial extent in simple fitting = 8.81"
[Thu Sep 29 11:23:32 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Thu Sep 29 11:23:32 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 8.81"
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36.csv
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36.csv
[Thu Sep 29 14:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Sep 29 14:10:23 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Sep 29 14:10:37 2011] Spatial fit model total counts = 280.845000, observed total counts = 283.000000
[Thu Sep 29 14:10:37 2011] Offset between fit and detection position for source 35 = 6.469297 pixels
[Thu Sep 29 14:10:37 2011] 276.864000 total counts/ 150.620000 bgd. counts: snr = 10.286543
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 6.469297 pixels
  Position = (308.7, 239.9) = 11 38 56.34 -37 46 56.0
  Extent = 16.8 (15.2-17.6)", rotation angle = 0
  Source counts = 126.2 +/- 16.6
  Background counts = 150.6
  Rate = 0.003 +/- 0.0004
[Thu Sep 29 14:10:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:37 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 14:10:37 2011] Source does appear to be extended
[Thu Sep 29 14:10:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:38:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:38:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 14:38:31 2011] Initial guess for spatial extent in simple fitting = 16.80"
[Thu Sep 29 14:38:31 2011] source mask rpix=3.9, npix_max = 76, mask sum = 68, frac = 0.894
[Thu Sep 29 14:38:31 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 16.80"
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19.csv
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19.csv
[Thu Sep 29 17:52:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Sep 29 17:52:56 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Sep 29 17:53:01 2011] Warning, spatial fit 19 centroid is now closest to src. 34
[Thu Sep 29 17:53:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 17:53:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 17:53:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 17:53:01 2011] Source does appear to be extended
[Thu Sep 29 17:53:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:06:56 2011] XMMSAS src. selection expression = ellipse(26808.544000, 20819.504000, 1007.838029, 1007.838029, 0.000000, X, Y)
[Thu Sep 29 19:06:56 2011] Writing source region out to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35_src.reg
[Thu Sep 29 19:06:56 2011] Extracting stamp from image fullrun_mos2_xmm0112210101_pi300-10000_cl_sm2.00.img.gz, (251, 182) - (367, 298)
[Thu Sep 29 19:06:56 2011] XMMSAS bgd. selection expression = annulus(26808.544000, 20819.504000, 1679.730048, 3359.460097, X, Y) && !ellipse(25492.635400, 23960.118400, 1771.740051, 1771.740051, 0.000000, X, Y) && !ellipse(24574.300110, 23765.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.931488, 24195.947815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.785858, 23006.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.556885, 24734.584229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.517200, 19439.485400, 464.516813, 464.516813, 0.000000, X, Y) && !ellipse(25271.752411, 22360.977417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.434000, 24389.896600, 1169.864034, 1169.864034, 0.000000, X, Y) && !ellipse(23159.197009, 24537.775818, 1748.557943, 404.258334, 0.000000, X, Y)
[Thu Sep 29 19:06:56 2011] Writing fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35.gif
[Thu Sep 29 19:13:09 2011] Mean detx,y = (53.77, 3305.29) 
[Thu Sep 29 19:13:10 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 19:13:23 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 19:13:23 2011] Setting source spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Sep 29 19:13:23 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Sep 29 19:47:53 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Sep 29 19:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:47:53 2011] Using photon index=1.80, rate=0.00337, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src35.arf
[Thu Sep 29 19:47:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:47:53 2011] Updating source flux to 3.9e-14