[Thu Sep 29 10:24:47 2011] Detection parameters:
  Position = (279.0, 310.8) = 11 39 7.22 -37 41 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.2 +/- 12.5
  Background counts = 27.0
  Rate = 0.001 +/- 0.0004

[Thu Sep 29 10:24:48 2011] Off-axis axis estimate = 1.67'
[Thu Sep 29 11:23:32 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 11:23:32 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep 29 11:23:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Sep 29 11:23:32 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 7.26"
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39.csv
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39.csv
[Thu Sep 29 14:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Sep 29 14:10:23 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Sep 29 14:10:23 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Sep 29 14:10:37 2011] Spatial fit model total counts = 489.000000, observed total counts = 489.000000
[Thu Sep 29 14:10:37 2011] Offset between fit and detection position for source 23 = 4.922513 pixels
[Thu Sep 29 14:10:37 2011] 489.355000 total counts/ 351.190000 bgd. counts: snr = 7.372707
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 4.922513 pixels
  Position = (280.5, 306.1) = 11 39 6.67 -37 42 7.7
  Extent = 14.5 (14.3-29.1)", rotation angle = 0
  Source counts = 138.2 +/- 22.1
  Background counts = 351.2
  Rate = 0.004 +/- 0.0006
[Thu Sep 29 14:10:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:37 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 14:10:37 2011] Source does appear to be extended
[Thu Sep 29 14:10:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:38:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:38:31 2011] Initial guess for spatial extent in simple fitting = 14.53"
[Thu Sep 29 14:38:31 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.950
[Thu Sep 29 14:38:31 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 14.53"
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20.csv
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20.csv
[Thu Sep 29 17:52:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Sep 29 17:52:56 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Sep 29 17:53:01 2011] Warning, spatial fit 20 centroid is now closest to src. 4
[Thu Sep 29 17:53:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 17:53:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 17:53:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 17:53:01 2011] Source does appear to be extended
[Thu Sep 29 17:53:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:06:56 2011] XMMSAS src. selection expression = ellipse(24358.993000, 26584.620000, 871.578025, 871.578025, 0.000000, X, Y)
[Thu Sep 29 19:06:56 2011] Writing source region out to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23_src.reg
[Thu Sep 29 19:06:56 2011] Extracting stamp from image fullrun_mos2_xmm0112210101_pi300-10000_cl_sm2.00.img.gz, (230, 256) - (331, 356)
[Thu Sep 29 19:06:56 2011] XMMSAS bgd. selection expression = annulus(24358.993000, 26584.620000, 1452.630042, 2905.260084, X, Y) && !ellipse(25492.635400, 23960.118400, 1771.740051, 1771.740051, 0.000000, X, Y) && !ellipse(24574.300110, 23765.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.931488, 24195.947815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.785858, 23006.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.556885, 24734.584229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21895.788406, 29294.214722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.434000, 24389.896600, 1169.864034, 1169.864034, 0.000000, X, Y) && !ellipse(23159.197009, 24537.775818, 1748.557943, 404.258334, 0.000000, X, Y)
[Thu Sep 29 19:06:56 2011] Writing fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23.gif
[Thu Sep 29 19:13:26 2011] Mean detx,y = (14.31, -2700.23) 
[Thu Sep 29 19:13:27 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 19:13:33 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 19:13:33 2011] Setting source spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Sep 29 19:13:33 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Sep 29 19:47:53 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Sep 29 19:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:47:53 2011] Using photon index=1.80, rate=0.00368, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src23.arf
[Thu Sep 29 19:47:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:47:53 2011] Updating source flux to 3.4e-14