[Thu Sep 29 10:24:47 2011] Detection parameters:
  Position = (283.0, 273.7) = 11 39 5.76 -37 44 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 768.0 +/- 43.5
  Background counts = 27.9
  Rate = 0.02 +/- 0.001

[Thu Sep 29 10:24:48 2011] Off-axis axis estimate = 2.11'
[Thu Sep 29 11:23:32 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 11:23:32 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Sep 29 11:23:32 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.014
[Thu Sep 29 11:23:32 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Sep 29 14:10:22 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Sep 29 14:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:37 2011] Source 2 is offset by -6.861654 and -2.934679 pixels which is larger than
2 X fitted extent = 2.170023 x 3.726520, not incorporating fit results
[Thu Sep 29 14:10:37 2011] Source 2 is offset by 8.793955 and 1.492930 pixels which is larger than
2 X fitted extent = 0.896189 x 0.896189, not incorporating fit results
[Thu Sep 29 14:10:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:37 2011] Assessing source extent using major
[Thu Sep 29 14:10:37 2011] Source does appear to be extended
[Thu Sep 29 14:10:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:10:37 2011] Source is confused with source 5
[Thu Sep 29 14:38:31 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:38:31 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Sep 29 14:38:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.014
[Thu Sep 29 14:38:31 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Thu Sep 29 17:52:55 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Sep 29 17:52:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2.csv
[Thu Sep 29 17:52:55 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Sep 29 17:52:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2.csv
[Thu Sep 29 17:52:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 29 17:52:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep 29 17:52:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:53:01 2011] Spatial fit model total counts = 2938.120000, observed total counts = 13341.000000
[Thu Sep 29 17:53:01 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep 29 17:53:01 2011] Source 2 is offset by 4.148185 and 2.592171 pixels which is larger than
2 X fitted extent = 1.546561 x 1.546561, not incorporating fit results
[Thu Sep 29 17:53:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 17:53:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 17:53:01 2011] Assessing source extent using major
[Thu Sep 29 17:53:01 2011] Source does appear to be extended
[Thu Sep 29 17:53:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:06:55 2011] XMMSAS src. selection expression = ellipse(24574.300110, 23765.110901, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep 29 19:06:55 2011] Writing source region out to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2_src.reg
[Thu Sep 29 19:06:55 2011] Extracting stamp from image fullrun_mos2_xmm0112210101_pi300-10000_cl_sm2.00.img.gz, (246, 236) - (321, 311)
[Thu Sep 29 19:06:55 2011] XMMSAS bgd. selection expression = annulus(24574.300110, 23765.110901, 1087.500000, 2175.000000, X, Y) && !ellipse(25492.635400, 23960.118400, 1771.740051, 1771.740051, 0.000000, X, Y) && !ellipse(24464.931488, 24195.947815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.785858, 23006.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.556885, 24734.584229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25271.752411, 22360.977417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23159.197009, 24537.775818, 1748.557943, 404.258334, 0.000000, X, Y) && !ellipse(26808.544000, 20819.504000, 1343.784039, 1343.784039, 0.000000, X, Y) && !ellipse(24358.993000, 26584.620000, 1162.104033, 1162.104033, 0.000000, X, Y)
[Thu Sep 29 19:06:55 2011] Writing fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2.gif
[Thu Sep 29 19:10:43 2011] Mean detx,y = (-586.92, -157.27) 
[Thu Sep 29 19:10:44 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 19:10:49 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 19:10:49 2011] Setting source spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Sep 29 19:10:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Sep 29 19:16:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep 29 19:16:54 2011] rmf not generated due to insufficient counts
[Thu Sep 29 19:47:53 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Sep 29 19:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:47:53 2011] Using photon index=1.80, rate=0.0224, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src2.arf
[Thu Sep 29 19:47:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:47:53 2011] Updating source flux to 2.2e-13
[Thu Sep 29 19:48:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting