[Thu Sep 29 10:24:47 2011] Detection parameters:
  Position = (293.6, 276.0) = 11 39 1.87 -37 44 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131863.5 +/- 425.6
  Background counts = 28.0
  Rate = 4 +/- 0.01

[Thu Sep 29 10:24:48 2011] Off-axis axis estimate = 1.66'
[Thu Sep 29 11:23:32 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 11:23:32 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Sep 29 11:23:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Thu Sep 29 11:23:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 14:10:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 14:10:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 14:10:22 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 14:10:22 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 14:10:37 2011] Spatial fit model total counts = 128548.000000, observed total counts = 128613.000000
[Thu Sep 29 14:10:37 2011] Offset between fit and detection position for source 1 = 0.074782 pixels
[Thu Sep 29 14:10:37 2011] 129336.000000 total counts/ 24784.000000 bgd. counts: snr = 664.120131
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.074782 pixels
  Position = (293.6, 276.0) = 11 39 1.89 -37 44 19.0
  Extent = 7.4 (7.3-7.4)", rotation angle = 0
  Source counts = 104552.0 +/- 359.6
  Background counts = 24784.0
  Rate = 3 +/- 0.01
[Thu Sep 29 14:10:37 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:37 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 14:10:37 2011] Source does appear to be extended
[Thu Sep 29 14:10:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:38:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 14:38:31 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Thu Sep 29 14:38:31 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.035
[Thu Sep 29 14:38:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.39"
[Thu Sep 29 17:52:55 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep 29 17:52:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 17:52:55 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep 29 17:52:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 17:52:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 17:52:56 2011] fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 17:52:56 2011] Fit fullrun_mos2_xmm0112210101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 17:53:01 2011] Spatial fit model total counts = 128611.000000, observed total counts = 128613.000000
[Thu Sep 29 17:53:01 2011] Offset between fit and detection position for source 1 = 0.000276 pixels
[Thu Sep 29 17:53:01 2011] 129407.300000 total counts/ 24844.300000 bgd. counts: snr = 663.383481
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000276 pixels
  Position = (293.6, 276.0) = 11 39 1.89 -37 44 19.0
  Extent = 7.4 (7.3-7.4)", rotation angle = 0
  Source counts = 104563.0 +/- 359.7
  Background counts = 24844.3
  Rate = 3 +/- 0.01
[Thu Sep 29 17:53:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 17:53:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 17:53:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 17:53:01 2011] Source does appear to be extended
[Thu Sep 29 17:53:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:06:55 2011] Counts = 104563.000000, rescaling region sizes by 3.000000
[Thu Sep 29 19:06:55 2011] XMMSAS src. selection expression = ellipse(25492.635400, 23960.118400, 1328.805038, 1328.805038, 0.000000, X, Y)
[Thu Sep 29 19:06:55 2011] Writing source region out to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep 29 19:06:55 2011] Extracting stamp from image fullrun_mos2_xmm0112210101_pi300-10000_cl_sm2.00.img.gz, (217, 200) - (370, 352)
[Thu Sep 29 19:06:55 2011] XMMSAS bgd. selection expression = annulus(25492.635400, 23960.118400, 6644.025191, 13288.050382, X, Y) && !ellipse(24574.300110, 23765.110901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.931488, 24195.947815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.785858, 23006.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24315.556885, 24734.584229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.349740, 28571.503600, 411.937612, 411.937612, 0.000000, X, Y) && !ellipse(17833.509600, 18524.911600, 567.240816, 567.240816, 0.000000, X, Y) && !ellipse(17331.944382, 21818.345184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.105286, 36301.750366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25725.517200, 19439.485400, 464.516813, 464.516813, 0.000000, X, Y) && !ellipse(22582.679640, 18238.134800, 375.028011, 375.028011, 0.000000, X, Y) && !ellipse(21895.788406, 29294.214722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25271.752411, 22360.977417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.632782, 12501.421249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.434000, 24389.896600, 1169.864034, 1169.864034, 0.000000, X, Y) && !ellipse(23159.197009, 24537.775818, 1748.557943, 404.258334, 0.000000, X, Y) && !ellipse(26808.544000, 20819.504000, 1343.784039, 1343.784039, 0.000000, X, Y) && !ellipse(24358.993000, 26584.620000, 1162.104033, 1162.104033, 0.000000, X, Y)
[Thu Sep 29 19:06:55 2011] Writing fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1.gif
[Thu Sep 29 19:07:04 2011] Mean detx,y = (47.92, -3.50) 
[Thu Sep 29 19:07:06 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 19:10:40 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 19:10:40 2011] Setting source spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Sep 29 19:10:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep 29 19:47:53 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Sep 29 19:47:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:47:53 2011] Using photon index=1.80, rate=2.79, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1.arf
[Thu Sep 29 19:47:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:47:53 2011] Updating source flux to 2.7e-11
[Thu Sep 29 19:48:57 2011] Reading fit data from xmm0112210101/analysis//spectral/fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Sep 29 19:48:57 2011] Spectral fit parameter nH value = 1.81854e+14
[Thu Sep 29 19:48:57 2011] Spectral fit parameter PhoIndex value = 1.15908
[Thu Sep 29 19:48:57 2011] Failed to get F(0.3-8.0) from xmm0112210101/analysis//spectral/fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 19:48:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:48:57 2011] Using Nh = 1.8e+14, photon index=1.16, rate=2.79, arf fullrun_mos2_xmm0112210101_pi300-10000_pass1_cl_src1.arf
[Thu Sep 29 19:48:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Sep 29 19:48:57 2011] Updating source flux to 3.8e-11