[Thu Sep 29 10:24:15 2011] Detection parameters:
  Position = (258.3, 261.4) = 11 39 14.84 -37 45 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 12.2
  Background counts = 28.5
  Rate = 0.002 +/- 0.0004

[Thu Sep 29 10:24:15 2011] Off-axis axis estimate = 3.96'
[Thu Sep 29 10:50:19 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:50:19 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Thu Sep 29 10:50:19 2011] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.675
[Thu Sep 29 10:50:19 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 8.41"
[Thu Sep 29 11:23:31 2011] fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Sep 29 11:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12.csv
[Thu Sep 29 11:23:31 2011] fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Sep 29 11:23:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12.csv
[Thu Sep 29 11:23:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 11:23:32 2011] fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 29 11:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep 29 11:23:32 2011] fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 29 11:23:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Sep 29 11:23:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112210101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 14:10:29 2011] Warning, spatial fit 12 centroid is now closest to src. 21
[Thu Sep 29 14:10:29 2011] Spatial fit model total counts = 784.773000, observed total counts = 784.000000
[Thu Sep 29 14:10:29 2011] Offset between fit and detection position for source 22 = 0.693415 pixels
[Thu Sep 29 14:10:29 2011] Warning, changing simple spatial fit ID from 12 to 17
[Thu Sep 29 14:10:29 2011] 816.921700 total counts/ 757.467000 bgd. counts: snr = 2.160252
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.693415 pixels
  Position = (259.0, 261.3) = 11 39 14.59 -37 45 22.8
  Extent = 5.8 (3.9-11.3)", rotation angle = 0
  Source counts = 59.5 +/- 28.6
  Background counts = 757.5
  Rate = 0.002 +/- 0.0008
[Thu Sep 29 14:10:29 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 14:10:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 14:10:29 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 14:10:29 2011] Source does appear to be extended
[Thu Sep 29 14:10:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 14:10:29 2011] Deleting source due to low Poisson probability 0.9