[Sat Aug 11 10:15:47 2012] Detection parameters: Position = (293.2, 373.5) = 18 56 8.35 1 20 8.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 68.8 +/- 14.0 Background counts = 45.6 Rate = 0.02 +/- 0.003 [Sat Aug 11 10:15:47 2012] Off-axis axis estimate = 5.46' [Sat Aug 11 11:12:43 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting [Sat Aug 11 11:12:43 2012] Initial guess for spatial extent in simple fitting = 9.16" [Sat Aug 11 11:12:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921 [Sat Aug 11 11:12:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.16" [Sat Aug 11 12:07:00 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1.ximg exists [Sat Aug 11 12:07:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1.csv [Sat Aug 11 12:07:00 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Aug 11 12:07:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1.csv [Sat Aug 11 12:07:00 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 11 12:07:00 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Aug 11 12:07:00 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Aug 11 12:07:00 2012] Fit fullrun_mos1_xmm0112201101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Aug 11 13:25:05 2012] Source 11 is offset by 3.204743 and 7.445438 pixels which is larger than 2 X fitted extent = 1.052552 x 1.052552, not incorporating fit results [Sat Aug 11 13:25:05 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 13:25:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 13:25:05 2012] Assessing source extent using major [Sat Aug 11 13:25:05 2012] Source does appear to be extended [Sat Aug 11 13:25:05 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 14:28:04 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting [Sat Aug 11 14:28:04 2012] Initial guess for spatial extent in simple fitting = 9.16" [Sat Aug 11 14:28:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921 [Sat Aug 11 14:28:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.16" [Sat Aug 11 15:16:58 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_src1.ximg exists [Sat Aug 11 15:16:58 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Aug 11 15:16:58 2012] Fit fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_src1 appears to have run properly [Sat Aug 11 15:16:58 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Aug 11 15:16:58 2012] fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Aug 11 15:16:58 2012] Fit fullrun_mos1_xmm0112201101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Aug 11 16:15:38 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.747464 pixels away [Sat Aug 11 16:15:38 2012] Vigneting correction estimate = 1.000000 [Sat Aug 11 16:15:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 11 16:15:38 2012] Assessing source extent using major [Sat Aug 11 16:15:38 2012] Source does appear to be extended [Sat Aug 11 16:15:38 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 11 16:33:32 2012] XMMSAS src. selection expression = ellipse(25457.264618, 32448.177124, 652.500000, 652.500000, 0.000000, X, Y) [Sat Aug 11 16:33:32 2012] Writing source region out to fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11_src.reg [Sat Aug 11 16:33:32 2012] Extracting stamp from image fullrun_mos1_xmm0112201101_pi300-10000_cl_sm2.00.img.gz, (256, 336) - (331, 411) [Sat Aug 11 16:33:32 2012] XMMSAS bgd. selection expression = annulus(25457.264618, 32448.177124, 1087.500000, 2175.000000, X, Y) [Sat Aug 11 16:33:32 2012] Writing fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11.gif [Sat Aug 11 16:33:36 2012] Mean detx,y = (-7909.76, -632.11) [Sat Aug 11 16:33:38 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 11 16:34:09 2012] Binned source spectrum to 10 counts/bin [Sat Aug 11 16:34:10 2012] Setting source spectrum file to fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sat Aug 11 16:34:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11_bgd.pi.gz [Sat Aug 11 16:37:30 2012] Not generating rmf since there are only 68 counts [Sat Aug 11 16:37:30 2012] rmf not generated due to insufficient counts [Sat Aug 11 16:47:12 2012] Updating aperture counts using extracted products [Sat Aug 11 16:47:12 2012] Error reading totcts from fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Sat Aug 11 16:47:12 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 11 16:47:12 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11.arf [Sat Aug 11 16:47:12 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 11 16:47:12 2012] Updating source flux to 2.2e-13 [Sat Aug 11 16:47:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Aug 11 16:47:26 2012] xmm0112201101/analysis//spectral/fullrun_mos1_xmm0112201101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete