[Fri Aug 17 10:14:29 2012] Detection parameters:
  Position = (288.2, 292.4) = 18 25 29.50 -9 34 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.8 +/- 15.7
  Background counts = 18.6
  Rate = 0.02 +/- 0.002

[Fri Aug 17 10:14:29 2012] Off-axis axis estimate = 0.86'
[Fri Aug 17 10:22:00 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:22:00 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Fri Aug 17 10:22:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 11, frac = 0.638
[Fri Aug 17 10:22:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.86"
[Fri Aug 17 10:25:20 2012] fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 17 10:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 10:25:20 2012] fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 17 10:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 17 10:25:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 10:25:20 2012] fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 17 10:25:20 2012] fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 17 10:25:20 2012] Fit fullrun_mos2_xmm0112201001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 17 10:25:23 2012] Spatial fit model total counts = 192.578000, observed total counts = 206.000000
[Fri Aug 17 10:25:23 2012] Offset between fit and detection position for source 2 = 0.872147 pixels
[Fri Aug 17 10:25:23 2012] 195.353300 total counts/ 165.105000 bgd. counts: snr = 2.354078
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.872147 pixels
  Position = (288.9, 291.9) = 18 25 29.30 -9 34 34.0
  Extent = 2.9 (1.7-4.3)", rotation angle = 0
  Source counts = 30.2 +/- 14.0
  Background counts = 165.1
  Rate = 0.005 +/- 0.002
[Fri Aug 17 10:25:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 10:25:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 10:25:23 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 10:25:23 2012] Source does appear to be extended
[Fri Aug 17 10:25:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 10:31:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:31:40 2012] Initial guess for spatial extent in simple fitting = 2.93"
[Fri Aug 17 10:31:40 2012] source mask rpix=0.7, npix_max = 5, mask sum = 2, frac = 0.364
[Fri Aug 17 10:31:40 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug 17 10:33:17 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 10:33:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 10:33:17 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 10:33:17 2012] Source does appear to be extended
[Fri Aug 17 10:33:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 10:34:41 2012] XMMSAS src. selection expression = ellipse(25084.563200, 25346.961400, 175.557605, 175.557605, 0.000000, X, Y)
[Fri Aug 17 10:34:41 2012] Writing source region out to fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 17 10:34:41 2012] Extracting stamp from image fullrun_mos2_xmm0112201001_pi300-10000_cl_sm2.00.img.gz, (279, 282) - (299, 302)
[Fri Aug 17 10:34:41 2012] XMMSAS bgd. selection expression = annulus(25084.563200, 25346.961400, 292.596008, 585.192017, X, Y)
[Fri Aug 17 10:34:41 2012] Writing fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2.gif
[Fri Aug 17 10:34:42 2012] Mean detx,y = (418.00, -978.15) 
[Fri Aug 17 10:34:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 10:34:50 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 10:34:50 2012] Setting source spectrum file to fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 10:34:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 17 10:35:05 2012] Not generating rmf since there are only 30 counts
[Fri Aug 17 10:35:05 2012] rmf not generated due to insufficient counts
[Fri Aug 17 10:35:27 2012] Updating aperture counts using extracted products
[Fri Aug 17 10:35:27 2012] Error reading totcts from fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 17 10:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 10:35:27 2012] Using photon index=1.80, rate=0.00477, arf fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2.arf
[Fri Aug 17 10:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 10:35:27 2012] Updating source flux to 9.6e-14
[Fri Aug 17 10:35:28 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 17 10:35:29 2012] xmm0112201001/analysis//spectral/fullrun_mos2_xmm0112201001_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete