[Sun Dec 25 02:54:44 2011] Detection parameters:
  Position = (335.3, 448.1) = 17 9 22.90 -44 16 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 477.8 +/- 29.2
  Background counts = 36.9
  Rate = 0.01 +/- 0.0007

[Sun Dec 25 02:54:46 2011] Off-axis axis estimate = 11.17'
[Sun Dec 25 11:35:42 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:35:42 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Sun Dec 25 11:35:42 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Sun Dec 25 11:35:42 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.02"
[Sun Dec 25 16:28:48 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5.ximg exists
[Sun Dec 25 16:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5.csv
[Sun Dec 25 16:28:48 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Dec 25 16:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5.csv
[Sun Dec 25 16:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 25 16:28:49 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Dec 25 16:29:32 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.219656 pixels away
[Sun Dec 25 16:29:32 2011] Source 8 is offset by -1.493454 and -2.628106 pixels which is larger than
2 X fitted extent = 1.524258 x 1.524258, not incorporating fit results
[Sun Dec 25 16:29:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:32 2011] Assessing source extent using major
[Sun Dec 25 16:29:32 2011] Source does appear to be extended
[Sun Dec 25 16:29:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:29:32 2011] Source is confused with source 10
[Mon Dec 26 00:29:27 2011] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 00:29:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 00:29:27 2011] Initial guess for spatial extent in simple fitting = 12.02"
[Mon Dec 26 00:29:27 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Mon Dec 26 00:29:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 12.02"
[Mon Dec 26 07:36:52 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 26 07:36:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5.csv
[Mon Dec 26 07:36:52 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 26 07:36:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5.csv
[Mon Dec 26 07:36:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 26 07:36:53 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 26 07:37:34 2011] Warning, spatial fit 5 centroid is now closest to src. 11
[Mon Dec 26 07:37:34 2011] Source 8 is offset by 7.474178 and 2.229458 pixels which is larger than
2 X fitted extent = 2.490414 x 2.490414, not incorporating fit results
[Mon Dec 26 07:37:34 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:34 2011] Assessing source extent using major
[Mon Dec 26 07:37:34 2011] Source does appear to be extended
[Mon Dec 26 07:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 11:08:43 2011] XMMSAS src. selection expression = ellipse(29123.995483, 38933.704803, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 11:08:43 2011] Writing source region out to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8_src.reg
[Mon Dec 26 11:08:43 2011] Extracting stamp from image fullrun_mos2_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (298, 411) - (373, 486)
[Mon Dec 26 11:08:43 2011] XMMSAS bgd. selection expression = annulus(29123.995483, 38933.704803, 1087.500000, 2175.000000, X, Y) && !ellipse(30216.068000, 38564.012000, 377.305611, 377.305611, 0.000000, X, Y) && !ellipse(29083.039001, 39819.858002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28616.680906, 38710.473201, 509.872015, 268.268792, 51.560284, X, Y) && !ellipse(30555.138000, 39891.164800, 389.768011, 170.031205, 36.435800, X, Y) && !ellipse(29757.090000, 38089.768400, 447.352013, 447.352013, 0.000000, X, Y) && !ellipse(29839.001400, 40586.459660, 492.776014, 208.744006, 229.804000, X, Y) && !ellipse(29238.189800, 37384.612800, 476.196814, 476.196814, 0.000000, X, Y) && !ellipse(30578.635590, 37166.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.978000, 38228.784000, 421.241612, 421.241612, 0.000000, X, Y) && !ellipse(31918.761627, 37535.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31104.678200, 38706.868280, 445.769613, 280.210408, 344.095374, X, Y) && !ellipse(28063.362000, 39822.818380, 479.665614, 479.665614, 0.000000, X, Y) && !ellipse(30923.762848, 38044.039001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31499.667908, 39510.586914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27338.058520, 36747.171000, 316.348009, 316.348009, 0.000000, X, Y) && !ellipse(27463.016000, 41054.914000, 2011.064058, 2011.064058, 0.000000, X, Y) && !ellipse(26262.928000, 41472.736000, 1310.792038, 1310.792038, 0.000000, X, Y) && !ellipse(27814.139435, 36890.776581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31799.572052, 38587.138519, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 11:08:43 2011] Writing fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8.gif
[Mon Dec 26 11:11:06 2011] Mean detx,y = (5614.90, -14185.56) 
[Mon Dec 26 11:11:09 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 11:11:42 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 11:11:42 2011] Setting source spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 26 11:11:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Dec 26 12:08:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 12:08:32 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:52 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:52 2011] Error reading totcts from fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Dec 26 14:47:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:57 2011] Using photon index=1.80, rate=0.0107, arf fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src8.arf
[Mon Dec 26 14:47:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:57 2011] Updating source flux to 2.7e-13
[Mon Dec 26 14:54:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting