[Sun Dec 25 02:54:46 2011] Detection parameters:
  Position = (301.6, 478.2) = 17 9 36.57 -44 14 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 15.4
  Background counts = 27.8
  Rate = 0.003 +/- 0.0003

[Sun Dec 25 02:54:46 2011] Off-axis axis estimate = 13.04'
[Sun Dec 25 11:35:42 2011] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:35:42 2011] Initial guess for spatial extent in simple fitting = 12.95"
[Sun Dec 25 11:35:42 2011] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.869
[Sun Dec 25 11:35:42 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 12.95"
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33.ximg exists
[Sun Dec 25 16:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33.csv
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Dec 25 16:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33.csv
[Sun Dec 25 16:28:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:28:50 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Dec 25 16:28:50 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Dec 25 16:28:50 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Dec 25 16:29:32 2011] Warning, spatial fit 33 centroid is now closest to src. 26
[Sun Dec 25 16:29:32 2011] Source 41 is offset by 2.037789 and 7.387019 pixels which is larger than
2 X fitted extent = 1.446225 x 1.446225, not incorporating fit results
[Sun Dec 25 16:29:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:32 2011] Assessing source extent using major
[Sun Dec 25 16:29:32 2011] Source does appear to be extended
[Sun Dec 25 16:29:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:29:32 2011] Source is confused with source 26
[Mon Dec 26 00:29:27 2011] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 00:29:27 2011] Initial guess for spatial extent in simple fitting = 12.95"
[Mon Dec 26 00:29:27 2011] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.869
[Mon Dec 26 00:29:27 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.95"
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33.csv
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33.csv
[Mon Dec 26 07:36:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 07:36:54 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Dec 26 07:36:54 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Dec 26 07:36:54 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Dec 26 07:37:34 2011] Spatial fit model total counts = 1614.670000, observed total counts = 1690.000000
[Mon Dec 26 07:37:34 2011] Offset between fit and detection position for source 41 = 1.279165 pixels
[Mon Dec 26 07:37:34 2011] Warning, changing simple spatial fit ID from 33 to 31
[Mon Dec 26 07:37:34 2011] 1576.132000 total counts/ 1306.190000 bgd. counts: snr = 7.469083
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.279165 pixels
  Position = (302.4, 477.3) = 17 9 36.22 -44 14 27.1
  Extent = 16.4 (16.4-16.6)", rotation angle = 0
  Source counts = 269.9 +/- 39.7
  Background counts = 1306.2
  Rate = 0.006 +/- 0.0009
[Mon Dec 26 07:37:34 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:34 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 07:37:34 2011] Source does appear to be extended
[Mon Dec 26 07:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 11:08:44 2011] XMMSAS src. selection expression = ellipse(26262.928000, 41472.736000, 983.094028, 983.094028, 0.000000, X, Y)
[Mon Dec 26 11:08:44 2011] Writing source region out to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41_src.reg
[Mon Dec 26 11:08:44 2011] Extracting stamp from image fullrun_mos2_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (246, 421) - (359, 534)
[Mon Dec 26 11:08:44 2011] XMMSAS bgd. selection expression = annulus(26262.928000, 41472.736000, 1638.490047, 3276.980094, X, Y) && !ellipse(29123.995483, 38933.704803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29083.039001, 39819.858002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28616.680906, 38710.473201, 509.872015, 268.268792, 51.560284, X, Y) && !ellipse(29757.090000, 38089.768400, 447.352013, 447.352013, 0.000000, X, Y) && !ellipse(29839.001400, 40586.459660, 492.776014, 208.744006, 229.804000, X, Y) && !ellipse(28082.978000, 38228.784000, 421.241612, 421.241612, 0.000000, X, Y) && !ellipse(28063.362000, 39822.818380, 479.665614, 479.665614, 0.000000, X, Y) && !ellipse(27463.016000, 41054.914000, 2011.064058, 2011.064058, 0.000000, X, Y) && !ellipse(25029.874800, 40574.588800, 372.980011, 372.980011, 0.000000, X, Y)
[Mon Dec 26 11:08:44 2011] Writing fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41.gif
[Mon Dec 26 11:31:11 2011] Mean detx,y = (3224.20, -16878.98) 
[Mon Dec 26 11:31:14 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 11:32:07 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 11:32:08 2011] Setting source spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Dec 26 11:32:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Dec 26 14:47:55 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:55 2011] Error reading totcts from fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Dec 26 14:48:00 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:48:00 2011] Using photon index=1.80, rate=0.00603, arf fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src41.arf
[Mon Dec 26 14:48:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:48:00 2011] Updating source flux to 1.8e-13
[Mon Dec 26 14:54:22 2011] Flag b found in src. 41 procflags, skipping spectral fitting
[Mon Dec 26 14:54:22 2011] Flag c found in src. 41 procflags, skipping spectral fitting