[Sun Dec 25 02:54:45 2011] Detection parameters:
  Position = (377.6, 239.9) = 17 9 5.63 -44 31 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 163.5 +/- 17.0
  Background counts = 28.6
  Rate = 0.006 +/- 0.0007

[Sun Dec 25 02:54:46 2011] Off-axis axis estimate = 7.14'
[Sun Dec 25 11:35:42 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:35:42 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Sun Dec 25 11:35:42 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Sun Dec 25 11:35:42 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 10.00"
[Sun Dec 25 16:28:48 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17.ximg exists
[Sun Dec 25 16:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17.csv
[Sun Dec 25 16:28:48 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Dec 25 16:28:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17.csv
[Sun Dec 25 16:28:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Dec 25 16:28:49 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Dec 25 16:29:32 2011] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 13.406275 pixels away
[Sun Dec 25 16:29:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:32 2011] Assessing source extent using major
[Sun Dec 25 16:29:32 2011] Source does appear to be extended
[Sun Dec 25 16:29:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 00:29:27 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 00:29:27 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Mon Dec 26 00:29:27 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.958
[Mon Dec 26 00:29:27 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 10.00"
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17.csv
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17.csv
[Mon Dec 26 07:36:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Dec 26 07:36:53 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Dec 26 07:37:34 2011] Spatial fit model total counts = 416.909000, observed total counts = 417.000000
[Mon Dec 26 07:37:34 2011] Offset between fit and detection position for source 38 = 0.250042 pixels
[Mon Dec 26 07:37:34 2011] 427.543000 total counts/ 267.008000 bgd. counts: snr = 9.824435
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.250042 pixels
  Position = (377.6, 239.7) = 17 9 5.66 -44 31 40.4
  Extent = 7.8 (6.1-9.7)", rotation angle = 0
  Source counts = 160.5 +/- 20.7
  Background counts = 267.0
  Rate = 0.004 +/- 0.0005
[Mon Dec 26 07:37:34 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:34 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 07:37:34 2011] Source does appear to be extended
[Mon Dec 26 07:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 11:08:44 2011] XMMSAS src. selection expression = ellipse(32798.417200, 20801.400400, 468.058813, 468.058813, 0.000000, X, Y)
[Mon Dec 26 11:08:44 2011] Writing source region out to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38_src.reg
[Mon Dec 26 11:08:44 2011] Extracting stamp from image fullrun_mos2_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (351, 213) - (404, 267)
[Mon Dec 26 11:08:44 2011] XMMSAS bgd. selection expression = annulus(32798.417200, 20801.400400, 780.098022, 1560.196045, X, Y)
[Mon Dec 26 11:08:44 2011] Writing fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38.gif
[Mon Dec 26 11:18:49 2011] Mean detx,y = (7491.72, 4189.73) 
[Mon Dec 26 11:18:52 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 11:19:32 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 11:19:32 2011] Setting source spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Dec 26 11:19:32 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Dec 26 14:47:53 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:53 2011] Error reading totcts from fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Dec 26 14:47:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:58 2011] Using photon index=1.80, rate=0.00359, arf fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src38.arf
[Mon Dec 26 14:47:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:58 2011] Updating source flux to 6.8e-14