[Sun Dec 25 02:54:45 2011] Detection parameters:
  Position = (322.1, 466.2) = 17 9 28.26 -44 15 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.1 +/- 17.3
  Background counts = 32.4
  Rate = 0.003 +/- 0.0004

[Sun Dec 25 02:54:46 2011] Off-axis axis estimate = 12.28'
[Sun Dec 25 11:35:42 2011] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 11:35:42 2011] Initial guess for spatial extent in simple fitting = 12.57"
[Sun Dec 25 11:35:42 2011] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914
[Sun Dec 25 11:35:42 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 12.57"
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31.ximg exists
[Sun Dec 25 16:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31.csv
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Dec 25 16:28:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31.csv
[Sun Dec 25 16:28:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Dec 25 16:28:49 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Dec 25 16:28:50 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Dec 25 16:29:32 2011] Spatial fit model total counts = 666.212000, observed total counts = 669.000000
[Sun Dec 25 16:29:32 2011] Offset between fit and detection position for source 26 = 8.603423 pixels
[Sun Dec 25 16:29:32 2011] 660.262000 total counts/ 356.291000 bgd. counts: snr = 16.103850
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 8.603423 pixels
  Position = (316.2, 472.5) = 17 9 30.64 -44 14 48.0
  Extent = 25.1 (25.1-50.3)", rotation angle = 0
  Source counts = 304.0 +/- 25.7
  Background counts = 356.3
  Rate = 0.007 +/- 0.0006
[Sun Dec 25 16:29:32 2011] Source 26 is offset by 3.319770 and 5.357586 pixels which is larger than
2 X fitted extent = 1.488069 x 1.488069, not incorporating fit results
[Sun Dec 25 16:29:32 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:32 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 16:29:32 2011] Source does appear to be extended
[Sun Dec 25 16:29:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:29:32 2011] Source is confused with source 6
[Mon Dec 26 00:29:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 00:29:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 00:29:27 2011] Initial guess for spatial extent in simple fitting = 25.14"
[Mon Dec 26 00:29:27 2011] source mask rpix=5.8, npix_max = 157, mask sum = 169, frac = 1.072
[Mon Dec 26 00:29:27 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 25.14"
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31.csv
[Mon Dec 26 07:36:53 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Dec 26 07:36:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31.csv
[Mon Dec 26 07:36:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 07:36:54 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Dec 26 07:36:54 2011] fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Dec 26 07:36:54 2011] Fit fullrun_mos2_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon Dec 26 07:37:34 2011] Source 26 is offset by -5.768322 and 6.602000 pixels which is larger than
2 X fitted extent = 1.413747 x 1.413747, not incorporating fit results
[Mon Dec 26 07:37:34 2011] Warning, spatial fit 31 centroid is now closest to src. 41
[Mon Dec 26 07:37:34 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:34 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 07:37:34 2011] Source does appear to be extended
[Mon Dec 26 07:37:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 11:08:44 2011] XMMSAS src. selection expression = ellipse(27463.016000, 41054.914000, 1508.298043, 1508.298043, 0.000000, X, Y)
[Mon Dec 26 11:08:44 2011] Writing source region out to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26_src.reg
[Mon Dec 26 11:08:44 2011] Extracting stamp from image fullrun_mos2_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (230, 386) - (403, 559)
[Mon Dec 26 11:08:44 2011] XMMSAS bgd. selection expression = annulus(27463.016000, 41054.914000, 2513.830072, 5027.660145, X, Y) && !ellipse(30216.068000, 38564.012000, 377.305611, 377.305611, 0.000000, X, Y) && !ellipse(27973.377472, 35257.925598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28407.472000, 35950.760000, 509.816815, 509.816815, 0.000000, X, Y) && !ellipse(29123.995483, 38933.704803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29083.039001, 39819.858002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32473.892000, 39020.778000, 813.208023, 813.208023, 0.000000, X, Y) && !ellipse(28616.680906, 38710.473201, 509.872015, 268.268792, 51.560284, X, Y) && !ellipse(30555.138000, 39891.164800, 389.768011, 170.031205, 36.435800, X, Y) && !ellipse(29757.090000, 38089.768400, 447.352013, 447.352013, 0.000000, X, Y) && !ellipse(29839.001400, 40586.459660, 492.776014, 208.744006, 229.804000, X, Y) && !ellipse(29238.189800, 37384.612800, 476.196814, 476.196814, 0.000000, X, Y) && !ellipse(30578.635590, 37166.339417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.978000, 38228.784000, 421.241612, 421.241612, 0.000000, X, Y) && !ellipse(31918.761627, 37535.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31377.993225, 35692.463623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31104.678200, 38706.868280, 445.769613, 280.210408, 344.095374, X, Y) && !ellipse(28063.362000, 39822.818380, 479.665614, 479.665614, 0.000000, X, Y) && !ellipse(29938.978641, 35485.739526, 749.108561, 214.213627, 354.369577, X, Y) && !ellipse(30923.762848, 38044.039001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31499.667908, 39510.586914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32983.362000, 36549.337158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32653.302645, 35301.735576, 940.434754, 225.751851, 323.791904, X, Y) && !ellipse(27338.058520, 36747.171000, 316.348009, 316.348009, 0.000000, X, Y) && !ellipse(26262.928000, 41472.736000, 1310.792038, 1310.792038, 0.000000, X, Y) && !ellipse(27814.139435, 36890.776581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.856293, 38404.581360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31799.572052, 38587.138519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25029.874800, 40574.588800, 372.980011, 372.980011, 0.000000, X, Y)
[Mon Dec 26 11:08:44 2011] Writing fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26.gif
[Mon Dec 26 11:28:00 2011] Mean detx,y = (4316.94, -16239.19) 
[Mon Dec 26 11:28:04 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 11:30:26 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 11:30:27 2011] Setting source spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Dec 26 11:30:27 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Dec 26 14:47:55 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:55 2011] Error reading totcts from fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Dec 26 14:47:59 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:59 2011] Using photon index=1.80, rate=0.00679, arf fullrun_mos2_xmm0112200701_pi300-10000_pass1_cl_src26.arf
[Mon Dec 26 14:47:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:59 2011] Updating source flux to 1.8e-13
[Mon Dec 26 14:54:22 2011] Flag b found in src. 26 procflags, skipping spectral fitting
[Mon Dec 26 14:54:22 2011] Flag c found in src. 26 procflags, skipping spectral fitting