[Sun Dec 25 02:53:39 2011] Detection parameters:
  Position = (302.5, 279.2) = 17 9 36.19 -44 28 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 15.4
  Background counts = 48.3
  Rate = 0.002 +/- 0.0004

[Sun Dec 25 02:53:40 2011] Off-axis axis estimate = 1.42'
[Sun Dec 25 03:27:17 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:27:17 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Dec 25 03:27:17 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090
[Sun Dec 25 03:27:17 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 7.14"
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53.csv
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53.csv
[Sun Dec 25 11:35:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:35:42 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Dec 25 11:35:42 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Dec 25 11:35:42 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Sun Dec 25 16:29:17 2011] Source 56 is offset by 7.065525 and 2.156129 pixels which is larger than
2 X fitted extent = 6.565563 x 6.565563, not incorporating fit results
[Sun Dec 25 16:29:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:17 2011] Assessing source extent using major
[Sun Dec 25 16:29:17 2011] Source does appear to be extended
[Sun Dec 25 16:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:41:19 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:41:19 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Dec 25 16:41:19 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090
[Sun Dec 25 16:41:19 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 7.14"
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50.ximg exists
[Mon Dec 26 00:29:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50.csv
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Dec 26 00:29:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50.csv
[Mon Dec 26 00:29:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Dec 26 00:29:27 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Dec 26 07:37:17 2011] Source 56 is offset by 7.065525 and 2.260841 pixels which is larger than
2 X fitted extent = 6.565563 x 6.565563, not incorporating fit results
[Mon Dec 26 07:37:18 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:18 2011] Assessing source extent using major
[Mon Dec 26 07:37:18 2011] Source does appear to be extended
[Mon Dec 26 07:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 08:25:57 2011] XMMSAS src. selection expression = ellipse(26268.994690, 24244.909210, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing source region out to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56_src.reg
[Mon Dec 26 08:25:57 2011] Extracting stamp from image fullrun_mos1_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (265, 242) - (340, 317)
[Mon Dec 26 08:25:57 2011] XMMSAS bgd. selection expression = annulus(26268.994690, 24244.909210, 1087.500000, 2175.000000, X, Y) && !ellipse(24863.912200, 23906.256400, 566.245616, 566.245616, 0.000000, X, Y) && !ellipse(27955.459000, 23715.193000, 340.820010, 340.820010, 0.000000, X, Y) && !ellipse(27065.460999, 25410.119263, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56.gif
[Mon Dec 26 09:00:33 2011] Mean detx,y = (297.87, -1443.07) 
[Mon Dec 26 09:00:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 09:00:58 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 09:00:59 2011] Setting source spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Dec 26 09:00:59 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Dec 26 11:07:38 2011] Not generating rmf since there are only 78 counts
[Mon Dec 26 11:07:38 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:46 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:46 2011] Error reading totcts from fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Dec 26 14:47:51 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:51 2011] Using photon index=1.80, rate=0.00184, arf fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src56.arf
[Mon Dec 26 14:47:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:51 2011] Updating source flux to 1.9e-14
[Mon Dec 26 14:48:02 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting