[Sun Dec 25 02:53:39 2011] Detection parameters:
  Position = (244.7, 290.1) = 17 9 59.66 -44 27 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 13.3
  Background counts = 28.9
  Rate = 0.002 +/- 0.0004

[Sun Dec 25 02:53:40 2011] Off-axis axis estimate = 3.94'
[Sun Dec 25 03:27:17 2011] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:27:17 2011] Initial guess for spatial extent in simple fitting = 8.40"
[Sun Dec 25 03:27:17 2011] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.973
[Sun Dec 25 03:27:17 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 8.40"
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 11:35:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:35:41 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Dec 25 11:35:41 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Dec 25 11:35:41 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Dec 25 16:29:17 2011] Source 55 is offset by -6.975732 and 6.835397 pixels which is larger than
2 X fitted extent = 0.965297 x 0.965297, not incorporating fit results
[Sun Dec 25 16:29:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:17 2011] Assessing source extent using major
[Sun Dec 25 16:29:17 2011] Source does appear to be extended
[Sun Dec 25 16:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:41:19 2011] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:41:19 2011] Initial guess for spatial extent in simple fitting = 8.40"
[Sun Dec 25 16:41:19 2011] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.973
[Sun Dec 25 16:41:19 2011] Giving source the simple spatial ID 48 for pass 1, mean size = 8.40"
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src48.ximg exists
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Dec 26 00:29:26 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src48 appears to have run properly
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Dec 26 00:29:27 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Mon Dec 26 07:37:17 2011] Source 55 is offset by -6.975732 and 6.835397 pixels which is larger than
2 X fitted extent = 0.965297 x 0.965297, not incorporating fit results
[Mon Dec 26 07:37:17 2011] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 62.727576 pixels away
[Mon Dec 26 07:37:18 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:18 2011] Assessing source extent using major
[Mon Dec 26 07:37:18 2011] Source does appear to be extended
[Mon Dec 26 07:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 08:25:57 2011] XMMSAS src. selection expression = ellipse(21244.459274, 25191.331573, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing source region out to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55_src.reg
[Mon Dec 26 08:25:57 2011] Extracting stamp from image fullrun_mos1_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (207, 253) - (282, 328)
[Mon Dec 26 08:25:57 2011] XMMSAS bgd. selection expression = annulus(21244.459274, 25191.331573, 1087.500000, 2175.000000, X, Y) && !ellipse(21797.991260, 26926.795600, 295.244008, 295.244008, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55.gif
[Mon Dec 26 08:58:37 2011] Mean detx,y = (-1207.03, 3363.95) 
[Mon Dec 26 08:58:40 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 08:59:01 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 08:59:01 2011] Setting source spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Dec 26 08:59:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon Dec 26 11:06:52 2011] Not generating rmf since there are only 74 counts
[Mon Dec 26 11:06:52 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:45 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:45 2011] Error reading totcts from fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Dec 26 14:47:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:50 2011] Using photon index=1.80, rate=0.00222, arf fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src55.arf
[Mon Dec 26 14:47:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:50 2011] Updating source flux to 2.3e-14
[Mon Dec 26 14:48:02 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting