[Sun Dec 25 02:53:34 2011] Detection parameters:
  Position = (338.3, 451.0) = 17 9 21.70 -44 16 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.1 +/- 22.9
  Background counts = 30.6
  Rate = 0.007 +/- 0.0005

[Sun Dec 25 02:53:40 2011] Off-axis axis estimate = 11.43'
[Sun Dec 25 03:27:17 2011] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:27:17 2011] Initial guess for spatial extent in simple fitting = 12.14"
[Sun Dec 25 03:27:17 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.831
[Sun Dec 25 03:27:17 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 12.14"
[Sun Dec 25 11:35:39 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11.ximg exists
[Sun Dec 25 11:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11.csv
[Sun Dec 25 11:35:39 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Dec 25 11:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11.csv
[Sun Dec 25 11:35:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Dec 25 11:35:40 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 25 16:29:16 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.059553 pixels away
[Sun Dec 25 16:29:16 2011] Warning, spatial fit 11 centroid is now closest to src. 2
[Sun Dec 25 16:29:16 2011] Source 4 is offset by 7.678481 and 4.978820 pixels which is larger than
2 X fitted extent = 1.577149 x 4.106363, not incorporating fit results
[Sun Dec 25 16:29:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:17 2011] Assessing source extent using major
[Sun Dec 25 16:29:17 2011] Source does appear to be extended
[Sun Dec 25 16:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:29:17 2011] Source is confused with source 20
[Sun Dec 25 16:41:19 2011] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:41:19 2011] Initial guess for spatial extent in simple fitting = 12.14"
[Sun Dec 25 16:41:19 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.831
[Sun Dec 25 16:41:19 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 12.14"
[Mon Dec 26 00:29:25 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 26 00:29:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11.csv
[Mon Dec 26 00:29:25 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 26 00:29:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11.csv
[Mon Dec 26 00:29:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 26 00:29:26 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 26 07:37:17 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.077220 pixels away
[Mon Dec 26 07:37:17 2011] Warning, spatial fit 11 centroid is now closest to src. 2
[Mon Dec 26 07:37:17 2011] Source 4 is offset by 7.376320 and 4.290981 pixels which is larger than
2 X fitted extent = 2.872745 x 2.872745, not incorporating fit results
[Mon Dec 26 07:37:17 2011] Source 4 is offset by 2.099148 and 8.173762 pixels which is larger than
2 X fitted extent = 1.409389 x 1.409389, not incorporating fit results
[Mon Dec 26 07:37:17 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:17 2011] Assessing source extent using major
[Mon Dec 26 07:37:17 2011] Source does appear to be extended
[Mon Dec 26 07:37:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 08:25:56 2011] XMMSAS src. selection expression = ellipse(29383.083862, 39185.003326, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 08:25:56 2011] Writing source region out to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4_src.reg
[Mon Dec 26 08:25:56 2011] Extracting stamp from image fullrun_mos1_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (301, 413) - (376, 488)
[Mon Dec 26 08:25:56 2011] XMMSAS bgd. selection expression = annulus(29383.083862, 39185.003326, 1087.500000, 2175.000000, X, Y) && !ellipse(28793.552000, 38568.018000, 497.273614, 497.273614, 0.000000, X, Y) && !ellipse(27800.450104, 40302.645874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.713043, 40866.544891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29782.806488, 37932.920715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32315.908875, 38078.827850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27843.429718, 37245.483185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28126.514252, 39395.897614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31647.422000, 36952.452000, 1907.664055, 1907.664055, 0.000000, X, Y) && !ellipse(29089.427002, 36297.834198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28134.447479, 39894.105896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.606476, 40556.615356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.915039, 37957.944366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30802.088800, 37433.387500, 232.808807, 232.808807, 0.000000, X, Y) && !ellipse(29748.997345, 39654.691284, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 08:25:56 2011] Writing fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4.gif
[Mon Dec 26 08:32:55 2011] Mean detx,y = (-14215.43, -6305.17) 
[Mon Dec 26 08:32:57 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 08:33:21 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 08:33:22 2011] Setting source spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Dec 26 08:33:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Dec 26 09:46:56 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 09:46:56 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:42 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:42 2011] Error reading totcts from fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Dec 26 14:47:47 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:47 2011] Using photon index=1.80, rate=0.00688, arf fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src4.arf
[Mon Dec 26 14:47:47 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:47 2011] Updating source flux to 1.9e-13
[Mon Dec 26 14:48:02 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting