[Sun Dec 25 02:53:37 2011] Detection parameters:
  Position = (433.9, 406.2) = 17 8 42.90 -44 19 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.4 +/- 13.8
  Background counts = 25.0
  Rate = 0.002 +/- 0.0003

[Sun Dec 25 02:53:40 2011] Off-axis axis estimate = 12.55'
[Sun Dec 25 03:27:17 2011] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:27:17 2011] Initial guess for spatial extent in simple fitting = 12.70"
[Sun Dec 25 03:27:17 2011] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.876
[Sun Dec 25 03:27:17 2011] Giving source the simple spatial ID 52 for pass 0, mean size = 12.70"
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52.csv
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52.csv
[Sun Dec 25 11:35:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:35:41 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Dec 25 11:35:42 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Dec 25 11:35:42 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sun Dec 25 16:29:17 2011] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 16.599342 pixels away
[Sun Dec 25 16:29:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:17 2011] Assessing source extent using major
[Sun Dec 25 16:29:17 2011] Source does appear to be extended
[Sun Dec 25 16:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:41:19 2011] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:41:19 2011] Initial guess for spatial extent in simple fitting = 12.70"
[Sun Dec 25 16:41:19 2011] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.876
[Sun Dec 25 16:41:19 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 12.70"
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49.ximg exists
[Mon Dec 26 00:29:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49.csv
[Mon Dec 26 00:29:26 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Dec 26 00:29:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49.csv
[Mon Dec 26 00:29:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Dec 26 00:29:27 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Mon Dec 26 07:37:17 2011] Spatial fit model total counts = 310.116000, observed total counts = 319.000000
[Mon Dec 26 07:37:17 2011] Offset between fit and detection position for source 35 = 0.127846 pixels
[Mon Dec 26 07:37:17 2011] 283.582400 total counts/ 209.852000 bgd. counts: snr = 5.089675
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.127846 pixels
  Position = (433.9, 406.3) = 17 8 42.93 -44 19 35.1
  Extent = 6.1 (5.2-7.5)", rotation angle = 0
  Source counts = 73.7 +/- 16.8
  Background counts = 209.9
  Rate = 0.002 +/- 0.0004
[Mon Dec 26 07:37:18 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:18 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 07:37:18 2011] Source does appear to be extended
[Mon Dec 26 07:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 08:25:57 2011] XMMSAS src. selection expression = ellipse(37700.867400, 35296.907800, 368.853011, 368.853011, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing source region out to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35_src.reg
[Mon Dec 26 08:25:57 2011] Extracting stamp from image fullrun_mos1_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (413, 385) - (455, 427)
[Mon Dec 26 08:25:57 2011] XMMSAS bgd. selection expression = annulus(37700.867400, 35296.907800, 614.755018, 1229.510035, X, Y)
[Mon Dec 26 08:25:57 2011] Writing fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35.gif
[Mon Dec 26 08:59:11 2011] Mean detx,y = (-9371.80, -14130.99) 
[Mon Dec 26 08:59:14 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 08:59:48 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 08:59:48 2011] Setting source spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Dec 26 08:59:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Dec 26 11:07:01 2011] Not generating rmf since there are only 73 counts
[Mon Dec 26 11:07:01 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:45 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:45 2011] Error reading totcts from fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Dec 26 14:47:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:50 2011] Using photon index=1.80, rate=0.00164, arf fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src35.arf
[Mon Dec 26 14:47:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:50 2011] Updating source flux to 7.2e-14
[Mon Dec 26 14:48:02 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting