[Sun Dec 25 02:53:36 2011] Detection parameters:
  Position = (347.5, 436.9) = 17 9 17.96 -44 17 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.1 +/- 16.2
  Background counts = 31.8
  Rate = 0.003 +/- 0.0004

[Sun Dec 25 02:53:40 2011] Off-axis axis estimate = 10.65'
[Sun Dec 25 03:27:17 2011] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 03:27:17 2011] Initial guess for spatial extent in simple fitting = 11.75"
[Sun Dec 25 03:27:17 2011] source mask rpix=2.7, npix_max = 41, mask sum = 27, frac = 0.659
[Sun Dec 25 03:27:17 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 11.75"
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41.csv
[Sun Dec 25 11:35:40 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Dec 25 11:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41.csv
[Sun Dec 25 11:35:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 11:35:41 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Dec 25 11:35:41 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Dec 25 11:35:41 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Dec 25 16:29:17 2011] Warning, spatial fit 41 centroid is now closest to src. 26
[Sun Dec 25 16:29:17 2011] Source 24 is offset by -0.232425 and -4.627858 pixels which is larger than
2 X fitted extent = 1.731917 x 1.731917, not incorporating fit results
[Sun Dec 25 16:29:17 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 16:29:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 16:29:17 2011] Assessing source extent using major
[Sun Dec 25 16:29:17 2011] Source does appear to be extended
[Sun Dec 25 16:29:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 16:29:17 2011] Source is confused with source 6
[Sun Dec 25 16:41:19 2011] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 16:41:19 2011] Initial guess for spatial extent in simple fitting = 11.75"
[Sun Dec 25 16:41:19 2011] source mask rpix=2.7, npix_max = 41, mask sum = 27, frac = 0.659
[Sun Dec 25 16:41:19 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 11.75"
[Mon Dec 26 00:29:25 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src39.ximg exists
[Mon Dec 26 00:29:25 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Dec 26 00:29:25 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_src39 appears to have run properly
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Dec 26 00:29:27 2011] fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Dec 26 00:29:27 2011] Fit fullrun_mos1_xmm0112200701_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Mon Dec 26 07:37:17 2011] Warning, spatial fit 39 centroid is now closest to src. 4
[Mon Dec 26 07:37:18 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 07:37:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 07:37:18 2011] Assessing source extent using major
[Mon Dec 26 07:37:18 2011] Source does appear to be extended
[Mon Dec 26 07:37:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 08:25:56 2011] XMMSAS src. selection expression = ellipse(30183.915039, 37957.944366, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 08:25:56 2011] Writing source region out to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24_src.reg
[Mon Dec 26 08:25:56 2011] Extracting stamp from image fullrun_mos1_xmm0112200701_pi300-10000_cl_sm2.00.img.gz, (310, 399) - (385, 474)
[Mon Dec 26 08:25:57 2011] XMMSAS bgd. selection expression = annulus(30183.915039, 37957.944366, 1087.500000, 2175.000000, X, Y) && !ellipse(28793.552000, 38568.018000, 497.273614, 497.273614, 0.000000, X, Y) && !ellipse(27800.450104, 40302.645874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.713043, 40866.544891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29782.806488, 37932.920715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32315.908875, 38078.827850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29383.083862, 39185.003326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32860.654600, 35458.977620, 866.216025, 225.977607, 325.320800, X, Y) && !ellipse(27843.429718, 37245.483185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28126.514252, 39395.897614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31647.422000, 36952.452000, 1907.664055, 1907.664055, 0.000000, X, Y) && !ellipse(28610.696014, 35216.050476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.427002, 36297.834198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33098.117676, 36825.728363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28134.447479, 39894.105896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.606476, 40556.615356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30802.088800, 37433.387500, 232.808807, 232.808807, 0.000000, X, Y) && !ellipse(31908.595520, 36131.759460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29748.997345, 39654.691284, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 08:25:57 2011] Writing fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24.gif
[Mon Dec 26 08:51:33 2011] Mean detx,y = (-12871.11, -6728.02) 
[Mon Dec 26 08:51:37 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 08:52:18 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 08:52:18 2011] Setting source spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Dec 26 08:52:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon Dec 26 10:56:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 10:56:15 2011] rmf not generated due to insufficient counts
[Mon Dec 26 14:47:44 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:47:44 2011] Error reading totcts from fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon Dec 26 14:47:50 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:47:50 2011] Using photon index=1.80, rate=0.00293, arf fullrun_mos1_xmm0112200701_pi300-10000_pass1_cl_src24.arf
[Mon Dec 26 14:47:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:47:50 2011] Updating source flux to 1.4e-13
[Mon Dec 26 14:48:02 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting