[Wed Jul  4 22:35:22 2012] Detection parameters:
  Position = (345.2, 445.2) = 17 9 18.43 -44 16 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 612.9 +/- 32.8
  Background counts = 42.6
  Rate = 0.02 +/- 0.0009

[Wed Jul  4 22:35:23 2012] Off-axis axis estimate = 11.17'
[Thu Jul  5 00:58:21 2012] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 00:58:21 2012] Initial guess for spatial extent in simple fitting = 12.01"
[Thu Jul  5 00:58:21 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Thu Jul  5 00:58:21 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.01"
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 02:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul  5 02:50:01 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul  5 02:50:14 2012] Warning, spatial fit 2 centroid is now closest to src. 18
[Thu Jul  5 02:50:14 2012] Spatial fit model total counts = 1248.990000, observed total counts = 1230.000000
[Thu Jul  5 02:50:14 2012] Offset between fit and detection position for source 7 = 1.922376 pixels
[Thu Jul  5 02:50:14 2012] Warning, changing simple spatial fit ID from 2 to 11
[Thu Jul  5 02:50:14 2012] 1181.922000 total counts/ 526.545000 bgd. counts: snr = 28.561003
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.922376 pixels
  Position = (344.6, 447.1) = 17 9 18.65 -44 16 38.2
  Extent = 13.5" x 6.3", rotation angle = 73
  Source counts = 655.4 +/- 34.4
  Background counts = 526.5
  Rate = 0.02 +/- 0.0009
[Thu Jul  5 02:50:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:14 2012] Assessing source extent using major
[Thu Jul  5 02:50:14 2012] Source does appear to be extended
[Thu Jul  5 02:50:14 2012] Computing asymmetry using major and minor axis, asym = 2.16
[Thu Jul  5 02:50:14 2012] Source is asymmetric
[Thu Jul  5 02:50:14 2012] Source is confused with source 10
[Thu Jul  5 02:50:14 2012] Source is confused with source 3
[Thu Jul  5 04:40:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 04:40:34 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Jul  5 04:40:34 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.971
[Thu Jul  5 04:40:34 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.92"
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul  5 06:26:44 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul  5 06:26:44 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul  5 06:26:57 2012] Spatial fit model total counts = 1296.820000, observed total counts = 1277.000000
[Thu Jul  5 06:26:57 2012] Offset between fit and detection position for source 7 = 0.463446 pixels
[Thu Jul  5 06:26:57 2012] 1133.625000 total counts/ 501.193000 bgd. counts: snr = 28.249537
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.463446 pixels
  Position = (344.6, 447.5) = 17 9 18.66 -44 16 36.2
  Extent = 13.0 (12.0-14.3)" x 6.2 (5.6-6.8)", rotation angle = 71 (66-75) degrees
  Source counts = 632.4 +/- 33.7
  Background counts = 501.2
  Rate = 0.02 +/- 0.0009
[Thu Jul  5 06:26:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:57 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 06:26:57 2012] Source does appear to be extended
[Thu Jul  5 06:26:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Thu Jul  5 06:26:57 2012] Source is asymmetric
[Thu Jul  5 07:25:15 2012] XMMSAS src. selection expression = ellipse(29932.317800, 38887.782200, 781.536022, 370.851011, 71.079200, X, Y)
[Thu Jul  5 07:25:15 2012] Writing source region out to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7_src.reg
[Thu Jul  5 07:25:15 2012] Extracting stamp from image fullrun_mos2_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (300, 403) - (390, 492)
[Thu Jul  5 07:25:15 2012] XMMSAS bgd. selection expression = annulus(29932.317800, 38887.782200, 1302.560037, 2605.120075, X, Y) && !ellipse(30433.731600, 39993.177600, 546.993616, 239.213607, 44.837291, X, Y) && !ellipse(28418.454000, 38945.454000, 363.719210, 363.719210, 0.000000, X, Y) && !ellipse(28797.734000, 39115.098000, 1163.272033, 1163.272033, 0.000000, X, Y) && !ellipse(29610.240000, 38491.118000, 654.088019, 654.088019, 0.000000, X, Y) && !ellipse(32414.674000, 39394.094000, 479.198414, 479.198414, 0.000000, X, Y) && !ellipse(27737.316162, 35438.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29888.221771, 39089.847076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27977.168000, 38418.736000, 606.391217, 606.391217, 0.000000, X, Y) && !ellipse(32117.511810, 39012.641479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.502000, 37515.896000, 1902.744055, 1902.744055, 0.000000, X, Y) && !ellipse(28926.662000, 37332.106000, 798.584823, 798.584823, 0.000000, X, Y) && !ellipse(31704.148160, 37556.757000, 510.275215, 510.275215, 0.000000, X, Y) && !ellipse(29723.639160, 35562.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.416000, 36161.130000, 497.240814, 497.240814, 0.000000, X, Y) && !ellipse(31168.392900, 35703.444200, 815.896023, 199.180006, 343.609700, X, Y) && !ellipse(30941.368347, 38771.963074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.076000, 40053.030600, 327.314409, 327.314409, 0.000000, X, Y) && !ellipse(31884.110000, 36441.716000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(30711.212200, 38074.662000, 354.431210, 354.431210, 0.000000, X, Y) && !ellipse(27197.676020, 36970.742200, 439.038413, 185.979205, 243.379141, X, Y) && !ellipse(31300.110596, 39653.217743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.281200, 40797.779000, 253.902407, 253.902407, 0.000000, X, Y) && !ellipse(29778.481445, 40623.346863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.532806, 38347.150421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27829.875793, 36871.840912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33128.958496, 39159.406189, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 07:25:15 2012] Writing fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7.gif
[Thu Jul  5 07:25:25 2012] Mean detx,y = (6395.37, -14057.45) 
[Thu Jul  5 07:25:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 07:25:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 07:25:32 2012] Setting source spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul  5 07:25:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul  5 08:38:52 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:52 2012] Error reading totcts from fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.0172, arf fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src7.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 5.2e-13
[Thu Jul  5 08:40:07 2012] Flag c found in src. 7 procflags, skipping spectral fitting