[Wed Jul  4 22:35:23 2012] Detection parameters:
  Position = (321.5, 469.8) = 17 9 28.01 -44 14 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.2 +/- 18.0
  Background counts = 36.3
  Rate = 0.004 +/- 0.0005

[Wed Jul  4 22:35:23 2012] Off-axis axis estimate = 12.53'
[Thu Jul  5 00:58:21 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 00:58:21 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Jul  5 00:58:21 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Thu Jul  5 00:58:21 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.70"
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32.csv
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32.csv
[Thu Jul  5 02:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:02 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Jul  5 02:50:02 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Jul  5 02:50:02 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu Jul  5 02:50:14 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 15.478094 pixels away
[Thu Jul  5 02:50:14 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 13.946860 pixels away
[Thu Jul  5 02:50:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:14 2012] Assessing source extent using major
[Thu Jul  5 02:50:14 2012] Source does appear to be extended
[Thu Jul  5 02:50:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 04:40:34 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 04:40:34 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Thu Jul  5 04:40:34 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Thu Jul  5 04:40:34 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 12.70"
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31.csv
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31.csv
[Thu Jul  5 06:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jul  5 06:26:44 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Jul  5 06:26:57 2012] Spatial fit model total counts = 711.604000, observed total counts = 707.000000
[Thu Jul  5 06:26:57 2012] Offset between fit and detection position for source 40 = 0.268722 pixels
[Thu Jul  5 06:26:57 2012] 706.411300 total counts/ 631.588000 bgd. counts: snr = 2.977282
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.268722 pixels
  Position = (321.5, 469.5) = 17 9 28.04 -44 15 0.8
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 74.8 +/- 26.6
  Background counts = 631.6
  Rate = 0.002 +/- 0.0007
[Thu Jul  5 06:26:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:57 2012] Assessing source extent using major
[Thu Jul  5 06:26:57 2012] Source does appear to be extended
[Thu Jul  5 06:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 07:25:16 2012] XMMSAS src. selection expression = ellipse(27918.281200, 40797.779000, 190.426805, 190.426805, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing source region out to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40_src.reg
[Thu Jul  5 07:25:16 2012] Extracting stamp from image fullrun_mos2_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (311, 459) - (332, 480)
[Thu Jul  5 07:25:16 2012] XMMSAS bgd. selection expression = annulus(27918.281200, 40797.779000, 317.378009, 634.756018, X, Y) && !ellipse(28797.734000, 39115.098000, 1163.272033, 1163.272033, 0.000000, X, Y) && !ellipse(28194.076000, 40053.030600, 327.314409, 327.314409, 0.000000, X, Y) && !ellipse(31884.110000, 36441.716000, 3805.488110, 3805.488110, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40.gif
[Thu Jul  5 07:30:54 2012] Mean detx,y = (4615.33, -16248.21) 
[Thu Jul  5 07:30:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 07:30:59 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 07:30:59 2012] Setting source spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jul  5 07:30:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Jul  5 08:37:45 2012] Not generating rmf since there are only 74 counts
[Thu Jul  5 08:37:45 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:52 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:52 2012] Error reading totcts from fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jul  5 08:38:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:53 2012] Using photon index=1.80, rate=0.00204, arf fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src40.arf
[Thu Jul  5 08:38:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:53 2012] Updating source flux to 1.3e-13
[Thu Jul  5 08:40:07 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting