[Wed Jul  4 22:35:23 2012] Detection parameters:
  Position = (377.3, 240.0) = 17 9 5.26 -44 31 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.1 +/- 17.2
  Background counts = 38.3
  Rate = 0.007 +/- 0.0008

[Wed Jul  4 22:35:23 2012] Off-axis axis estimate = 7.12'
[Thu Jul  5 00:58:21 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 00:58:21 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Jul  5 00:58:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Thu Jul  5 00:58:21 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.99"
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 02:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul  5 02:50:01 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jul  5 02:50:14 2012] Spatial fit model total counts = 527.874000, observed total counts = 489.000000
[Thu Jul  5 02:50:14 2012] Offset between fit and detection position for source 38 = 0.148508 pixels
[Thu Jul  5 02:50:14 2012] 523.584800 total counts/ 425.880000 bgd. counts: snr = 4.734480
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.148508 pixels
  Position = (377.2, 240.1) = 17 9 5.31 -44 31 38.4
  Extent = 5.4 (4.5-6.7)", rotation angle = 0
  Source counts = 97.7 +/- 22.9
  Background counts = 425.9
  Rate = 0.003 +/- 0.0006
[Thu Jul  5 02:50:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:14 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 02:50:14 2012] Source does appear to be extended
[Thu Jul  5 02:50:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 04:40:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 04:40:34 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Thu Jul  5 04:40:34 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.302
[Thu Jul  5 04:40:34 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 5.45"
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20.csv
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20.csv
[Thu Jul  5 06:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jul  5 06:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 06:26:57 2012] Warning, spatial fit 20 centroid is now closest to src. 28
[Thu Jul  5 06:26:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:57 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 06:26:57 2012] Source does appear to be extended
[Thu Jul  5 06:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 07:25:16 2012] XMMSAS src. selection expression = ellipse(32770.570200, 20839.802200, 326.929809, 326.929809, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing source region out to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38_src.reg
[Thu Jul  5 07:25:16 2012] Extracting stamp from image fullrun_mos2_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (358, 221) - (396, 259)
[Thu Jul  5 07:25:16 2012] XMMSAS bgd. selection expression = annulus(32770.570200, 20839.802200, 544.883016, 1089.766031, X, Y)
[Thu Jul  5 07:25:16 2012] Writing fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38.gif
[Thu Jul  5 07:27:57 2012] Mean detx,y = (7519.93, 4084.10) 
[Thu Jul  5 07:27:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 07:28:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 07:28:04 2012] Setting source spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jul  5 07:28:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Jul  5 08:14:42 2012] Not generating rmf since there are only 97 counts
[Thu Jul  5 08:14:42 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:52 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:52 2012] Error reading totcts from fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src38.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 5.6e-14
[Thu Jul  5 08:40:07 2012] Source 38 has fewer than 100.000000 counts, skipping spectral fitting