[Wed Jul  4 22:35:23 2012] Detection parameters:
  Position = (342.8, 467.5) = 17 9 19.38 -44 15 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.2 +/- 15.7
  Background counts = 33.9
  Rate = 0.004 +/- 0.0004

[Wed Jul  4 22:35:23 2012] Off-axis axis estimate = 12.67'
[Thu Jul  5 00:58:21 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 00:58:21 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Thu Jul  5 00:58:21 2012] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Thu Jul  5 00:58:21 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.76"
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33.csv
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33.csv
[Thu Jul  5 02:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:02 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Jul  5 02:50:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul  5 02:50:02 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Jul  5 02:50:02 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33.csv
[Thu Jul  5 02:50:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:14 2012] Warning, spatial fit 33 centroid is now closest to src. 40
[Thu Jul  5 02:50:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:14 2012] Assessing source extent using major
[Thu Jul  5 02:50:14 2012] Source does appear to be extended
[Thu Jul  5 02:50:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 04:40:34 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 04:40:34 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Thu Jul  5 04:40:34 2012] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Thu Jul  5 04:40:34 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 12.76"
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32.csv
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32.csv
[Thu Jul  5 06:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Jul  5 06:26:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Jul  5 06:26:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 06:26:57 2012] Spatial fit model total counts = -1768.620000, observed total counts = 801.000000
[Thu Jul  5 06:26:57 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 06:26:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:57 2012] Assessing source extent using major
[Thu Jul  5 06:26:57 2012] Source does appear to be extended
[Thu Jul  5 06:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 07:25:16 2012] XMMSAS src. selection expression = ellipse(29778.481445, 40623.346863, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing source region out to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26_src.reg
[Thu Jul  5 07:25:16 2012] Extracting stamp from image fullrun_mos2_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (305, 430) - (380, 505)
[Thu Jul  5 07:25:16 2012] XMMSAS bgd. selection expression = annulus(29778.481445, 40623.346863, 1087.500000, 2175.000000, X, Y) && !ellipse(29932.317800, 38887.782200, 1042.048030, 494.468014, 71.079200, X, Y) && !ellipse(30433.731600, 39993.177600, 546.993616, 239.213607, 44.837291, X, Y) && !ellipse(28418.454000, 38945.454000, 363.719210, 363.719210, 0.000000, X, Y) && !ellipse(28797.734000, 39115.098000, 1163.272033, 1163.272033, 0.000000, X, Y) && !ellipse(29610.240000, 38491.118000, 654.088019, 654.088019, 0.000000, X, Y) && !ellipse(32414.674000, 39394.094000, 479.198414, 479.198414, 0.000000, X, Y) && !ellipse(29888.221771, 39089.847076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27977.168000, 38418.736000, 606.391217, 606.391217, 0.000000, X, Y) && !ellipse(32117.511810, 39012.641479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.502000, 37515.896000, 1902.744055, 1902.744055, 0.000000, X, Y) && !ellipse(30941.368347, 38771.963074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.076000, 40053.030600, 327.314409, 327.314409, 0.000000, X, Y) && !ellipse(31884.110000, 36441.716000, 3805.488110, 3805.488110, 0.000000, X, Y) && !ellipse(31300.110596, 39653.217743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.281200, 40797.779000, 253.902407, 253.902407, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26.gif
[Thu Jul  5 07:31:01 2012] Mean detx,y = (6357.73, -15768.98) 
[Thu Jul  5 07:31:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 07:31:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 07:31:11 2012] Setting source spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jul  5 07:31:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jul  5 08:37:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul  5 08:37:48 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:52 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:52 2012] Error reading totcts from fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jul  5 08:38:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:53 2012] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src26.arf
[Thu Jul  5 08:38:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:53 2012] Updating source flux to 1.9e-13
[Thu Jul  5 08:40:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting