[Wed Jul  4 22:35:23 2012] Detection parameters:
  Position = (375.5, 419.0) = 17 9 6.12 -44 18 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.2 +/- 22.8
  Background counts = 41.0
  Rate = 0.007 +/- 0.0006

[Wed Jul  4 22:35:23 2012] Off-axis axis estimate = 10.38'
[Thu Jul  5 00:58:21 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 00:58:21 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Thu Jul  5 00:58:21 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Thu Jul  5 00:58:21 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.62"
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23.csv
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jul  5 02:50:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23.csv
[Thu Jul  5 02:50:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jul  5 02:50:01 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jul  5 02:50:01 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jul  5 02:50:14 2012] Warning, spatial fit 23 centroid is now closest to src. 30
[Thu Jul  5 02:50:14 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 10.082731 pixels away
[Thu Jul  5 02:50:14 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:14 2012] Assessing source extent using major
[Thu Jul  5 02:50:14 2012] Source does appear to be extended
[Thu Jul  5 02:50:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 04:40:34 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 04:40:34 2012] Initial guess for spatial extent in simple fitting = 11.62"
[Thu Jul  5 04:40:34 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Thu Jul  5 04:40:34 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.62"
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jul  5 06:26:44 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_src22 appears to have run properly
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jul  5 06:26:44 2012] fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jul  5 06:26:44 2012] Fit fullrun_mos2_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Jul  5 06:26:57 2012] Spatial fit model total counts = 3400.940000, observed total counts = 3396.000000
[Thu Jul  5 06:26:57 2012] Offset between fit and detection position for source 19 = 8.480219 pixels
[Thu Jul  5 06:26:57 2012] Warning, changing simple spatial fit ID from 22 to 13
[Thu Jul  5 06:26:57 2012] 3402.902000 total counts/ 2627.590000 bgd. counts: snr = 15.125081
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 8.480219 pixels
  Position = (367.0, 419.4) = 17 9 9.56 -44 18 38.4
  Extent = 47.6 (47.5-95.1)", rotation angle = 0
  Source counts = 775.3 +/- 58.3
  Background counts = 2627.6
  Rate = 0.02 +/- 0.002
[Thu Jul  5 06:26:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:57 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 06:26:57 2012] Source does appear to be extended
[Thu Jul  5 06:26:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 06:26:57 2012] Source is confused with source 23
[Thu Jul  5 07:25:16 2012] XMMSAS src. selection expression = ellipse(31884.110000, 36441.716000, 2854.116082, 2854.116082, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing source region out to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19_src.reg
[Thu Jul  5 07:25:16 2012] Extracting stamp from image fullrun_mos2_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (203, 255) - (531, 583)
[Thu Jul  5 07:25:16 2012] XMMSAS bgd. selection expression = annulus(31884.110000, 36441.716000, 4756.860137, 9513.720274, X, Y) && !ellipse(29932.317800, 38887.782200, 1042.048030, 494.468014, 71.079200, X, Y) && !ellipse(30433.731600, 39993.177600, 546.993616, 239.213607, 44.837291, X, Y) && !ellipse(28418.454000, 38945.454000, 363.719210, 363.719210, 0.000000, X, Y) && !ellipse(28797.734000, 39115.098000, 1163.272033, 1163.272033, 0.000000, X, Y) && !ellipse(29610.240000, 38491.118000, 654.088019, 654.088019, 0.000000, X, Y) && !ellipse(32414.674000, 39394.094000, 479.198414, 479.198414, 0.000000, X, Y) && !ellipse(27737.316162, 35438.528656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29358.211548, 34737.157532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29888.221771, 39089.847076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27977.168000, 38418.736000, 606.391217, 606.391217, 0.000000, X, Y) && !ellipse(32117.511810, 39012.641479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30945.502000, 37515.896000, 1902.744055, 1902.744055, 0.000000, X, Y) && !ellipse(28926.662000, 37332.106000, 798.584823, 798.584823, 0.000000, X, Y) && !ellipse(31704.148160, 37556.757000, 510.275215, 510.275215, 0.000000, X, Y) && !ellipse(29723.639160, 35562.253021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.416000, 36161.130000, 497.240814, 497.240814, 0.000000, X, Y) && !ellipse(31168.392900, 35703.444200, 815.896023, 199.180006, 343.609700, X, Y) && !ellipse(30941.368347, 38771.963074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28194.076000, 40053.030600, 327.314409, 327.314409, 0.000000, X, Y) && !ellipse(30819.984384, 34727.171942, 705.355882, 474.531796, 138.480263, X, Y) && !ellipse(30711.212200, 38074.662000, 354.431210, 354.431210, 0.000000, X, Y) && !ellipse(32354.668361, 35190.776262, 708.862420, 205.145804, 137.467368, X, Y) && !ellipse(33802.702600, 36290.373000, 708.862420, 171.621605, 132.255000, X, Y) && !ellipse(27197.676020, 36970.742200, 439.038413, 185.979205, 243.379141, X, Y) && !ellipse(25774.787537, 31419.512573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31300.110596, 39653.217743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.281200, 40797.779000, 253.902407, 253.902407, 0.000000, X, Y) && !ellipse(29778.481445, 40623.346863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.532806, 38347.150421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25203.250000, 40527.569336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27829.875793, 36871.840912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33128.958496, 39159.406189, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 07:25:16 2012] Writing fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19.gif
[Thu Jul  5 07:28:14 2012] Mean detx,y = (7967.85, -11788.03) 
[Thu Jul  5 07:28:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 07:29:36 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 07:29:36 2012] Setting source spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul  5 07:29:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jul  5 08:38:52 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:52 2012] Error reading totcts from fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0112200601_pi300-10000_pass1_cl_src19.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 3.9e-13
[Thu Jul  5 08:40:07 2012] Flag c found in src. 19 procflags, skipping spectral fitting