[Wed Jul  4 22:35:02 2012] Detection parameters:
  Position = (172.3, 219.6) = 17 10 28.71 -44 33 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.5 +/- 13.4
  Background counts = 31.7
  Rate = 0.003 +/- 0.0006

[Wed Jul  4 22:35:02 2012] Off-axis axis estimate = 10.79'
[Wed Jul  4 22:43:01 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 22:43:01 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Wed Jul  4 22:43:01 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Wed Jul  4 22:43:01 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 11.82"
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41.ximg exists
[Thu Jul  5 00:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41.csv
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Jul  5 00:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41.csv
[Thu Jul  5 00:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 00:58:21 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Jul  5 00:58:21 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Jul  5 00:58:21 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu Jul  5 02:50:09 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 10.178580 pixels away
[Thu Jul  5 02:50:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:09 2012] Assessing source extent using major
[Thu Jul  5 02:50:09 2012] Source does appear to be extended
[Thu Jul  5 02:50:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 02:51:11 2012] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 02:51:11 2012] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Jul  5 02:51:11 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Thu Jul  5 02:51:11 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.82"
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39.ximg exists
[Thu Jul  5 04:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39.csv
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Jul  5 04:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39.csv
[Thu Jul  5 04:40:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 04:40:34 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Jul  5 04:40:34 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Jul  5 04:40:34 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Jul  5 06:26:51 2012] Spatial fit model total counts = 295.995000, observed total counts = 296.000000
[Thu Jul  5 06:26:51 2012] Offset between fit and detection position for source 50 = 0.287433 pixels
[Thu Jul  5 06:26:51 2012] 295.898100 total counts/ 248.458000 bgd. counts: snr = 3.009672
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.287433 pixels
  Position = (172.3, 219.9) = 17 10 28.71 -44 33 6.0
  Extent = 4.9 (3.3-7.1)", rotation angle = 0
  Source counts = 47.4 +/- 17.2
  Background counts = 248.5
  Rate = 0.001 +/- 0.0005
[Thu Jul  5 06:26:52 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:52 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 06:26:52 2012] Source does appear to be extended
[Thu Jul  5 06:26:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 06:33:51 2012] XMMSAS src. selection expression = ellipse(14938.517200, 19079.303740, 295.737609, 295.737609, 0.000000, X, Y)
[Thu Jul  5 06:33:51 2012] Writing source region out to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50_src.reg
[Thu Jul  5 06:33:51 2012] Extracting stamp from image fullrun_mos1_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (155, 203) - (189, 237)
[Thu Jul  5 06:33:51 2012] XMMSAS bgd. selection expression = annulus(14938.517200, 19079.303740, 492.896014, 985.792028, X, Y)
[Thu Jul  5 06:33:51 2012] Writing fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50.gif
[Thu Jul  5 06:41:01 2012] Mean detx,y = (4286.76, 10255.52) 
[Thu Jul  5 06:41:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 06:41:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 06:41:07 2012] Setting source spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Jul  5 06:41:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Thu Jul  5 07:24:03 2012] Not generating rmf since there are only 47 counts
[Thu Jul  5 07:24:03 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:51 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:51 2012] Error reading totcts from fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src50.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 2.7e-14
[Thu Jul  5 08:38:53 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting