[Wed Jul  4 22:35:02 2012] Detection parameters:
  Position = (325.0, 407.9) = 17 9 26.61 -44 19 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 277.0 +/- 22.7
  Background counts = 40.3
  Rate = 0.007 +/- 0.0006

[Wed Jul  4 22:35:02 2012] Off-axis axis estimate = 8.17'
[Wed Jul  4 22:43:01 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 22:43:01 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Jul  4 22:43:01 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Wed Jul  4 22:43:01 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.51"
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul  5 00:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul  5 00:58:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 00:58:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 00:58:21 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul  5 00:58:21 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul  5 00:58:21 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jul  5 02:50:09 2012] Warning, spatial fit 21 centroid is now closest to src. 27
[Thu Jul  5 02:50:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:09 2012] Assessing source extent using major
[Thu Jul  5 02:50:09 2012] Source does appear to be extended
[Thu Jul  5 02:50:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 02:51:11 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 02:51:11 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Thu Jul  5 02:51:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.058
[Thu Jul  5 02:51:11 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.51"
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jul  5 04:40:33 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src20 appears to have run properly
[Thu Jul  5 04:40:34 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jul  5 04:40:34 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jul  5 04:40:34 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Jul  5 06:26:51 2012] Warning, spatial fit 20 centroid is now closest to src. 30
[Thu Jul  5 06:26:52 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:52 2012] Assessing source extent using major
[Thu Jul  5 06:26:52 2012] Source does appear to be extended
[Thu Jul  5 06:26:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 06:33:50 2012] XMMSAS src. selection expression = ellipse(28222.639587, 35439.224274, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  5 06:33:50 2012] Writing source region out to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32_src.reg
[Thu Jul  5 06:33:50 2012] Extracting stamp from image fullrun_mos1_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (287, 370) - (362, 445)
[Thu Jul  5 06:33:50 2012] XMMSAS bgd. selection expression = annulus(28222.639587, 35439.224274, 1087.500000, 2175.000000, X, Y) && !ellipse(29765.167600, 38036.269600, 582.176017, 582.176017, 0.000000, X, Y) && !ellipse(27571.524000, 34411.948000, 570.996016, 570.996016, 0.000000, X, Y) && !ellipse(28984.336200, 33501.476000, 1037.784030, 1037.784030, 0.000000, X, Y) && !ellipse(26384.700867, 35572.944824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.187000, 36409.626600, 554.270416, 554.270416, 0.000000, X, Y) && !ellipse(27710.161960, 37370.214800, 354.292810, 354.292810, 0.000000, X, Y) && !ellipse(27076.577606, 33961.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31032.794281, 34761.496185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26985.346000, 36804.942000, 343.408810, 343.408810, 0.000000, X, Y) && !ellipse(29521.978000, 34848.054000, 567.868016, 211.169606, 11.098000, X, Y) && !ellipse(30796.748901, 33664.055756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30851.169037, 34238.320007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30596.482697, 37456.419952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30027.284241, 36026.891113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.016602, 34143.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30361.605530, 33433.511597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27733.198212, 36963.471283, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 06:33:50 2012] Writing fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32.gif
[Thu Jul  5 06:37:17 2012] Mean detx,y = (-10617.96, -4630.65) 
[Thu Jul  5 06:37:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 06:37:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 06:37:25 2012] Setting source spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jul  5 06:37:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Jul  5 07:10:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul  5 07:10:37 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:51 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:51 2012] Error reading totcts from fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.00728, arf fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src32.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 1.4e-13
[Thu Jul  5 08:38:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting