[Wed Jul  4 22:35:02 2012] Detection parameters:
  Position = (303.8, 409.4) = 17 9 35.17 -44 19 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.5 +/- 23.2
  Background counts = 40.4
  Rate = 0.008 +/- 0.0006

[Wed Jul  4 22:35:02 2012] Off-axis axis estimate = 8.06'
[Wed Jul  4 22:43:01 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 22:43:01 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Wed Jul  4 22:43:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.771
[Wed Jul  4 22:43:01 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.46"
[Thu Jul  5 00:58:19 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  5 00:58:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 00:58:19 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  5 00:58:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 00:58:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  5 00:58:20 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  5 00:58:20 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul  5 02:50:09 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.086836 pixels away
[Thu Jul  5 02:50:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:50:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:50:09 2012] Assessing source extent using major
[Thu Jul  5 02:50:09 2012] Source does appear to be extended
[Thu Jul  5 02:50:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 02:51:11 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 02:51:11 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Thu Jul  5 02:51:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.771
[Thu Jul  5 02:51:11 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.46"
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Jul  5 04:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Jul  5 04:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11.csv
[Thu Jul  5 04:40:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Jul  5 04:40:33 2012] fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Jul  5 04:40:33 2012] Fit fullrun_mos1_xmm0112200601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Jul  5 06:26:51 2012] Warning, spatial fit 11 centroid is now closest to src. 22
[Thu Jul  5 06:26:52 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 06:26:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 06:26:52 2012] Assessing source extent using major
[Thu Jul  5 06:26:52 2012] Source does appear to be extended
[Thu Jul  5 06:26:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 06:33:50 2012] XMMSAS src. selection expression = ellipse(26384.700867, 35572.944824, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  5 06:33:50 2012] Writing source region out to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31_src.reg
[Thu Jul  5 06:33:50 2012] Extracting stamp from image fullrun_mos1_xmm0112200601_pi300-10000_cl_sm2.00.img.gz, (266, 372) - (341, 447)
[Thu Jul  5 06:33:50 2012] XMMSAS bgd. selection expression = annulus(26384.700867, 35572.944824, 1087.500000, 2175.000000, X, Y) && !ellipse(27571.524000, 34411.948000, 570.996016, 570.996016, 0.000000, X, Y) && !ellipse(28984.336200, 33501.476000, 1037.784030, 1037.784030, 0.000000, X, Y) && !ellipse(28815.187000, 36409.626600, 554.270416, 554.270416, 0.000000, X, Y) && !ellipse(28222.639587, 35439.224274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.161960, 37370.214800, 354.292810, 354.292810, 0.000000, X, Y) && !ellipse(27076.577606, 33961.766846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26985.346000, 36804.942000, 343.408810, 343.408810, 0.000000, X, Y) && !ellipse(29354.016602, 34143.631042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27733.198212, 36963.471283, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 06:33:50 2012] Writing fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31.gif
[Thu Jul  5 06:35:48 2012] Mean detx,y = (-10957.33, -2773.09) 
[Thu Jul  5 06:35:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 06:35:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 06:35:56 2012] Setting source spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jul  5 06:35:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jul  5 07:04:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul  5 07:04:04 2012] rmf not generated due to insufficient counts
[Thu Jul  5 08:38:51 2012] Updating aperture counts using extracted products
[Thu Jul  5 08:38:51 2012] Error reading totcts from fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jul  5 08:38:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 08:38:52 2012] Using photon index=1.80, rate=0.00847, arf fullrun_mos1_xmm0112200601_pi300-10000_pass1_cl_src31.arf
[Thu Jul  5 08:38:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 08:38:52 2012] Updating source flux to 1.7e-13
[Thu Jul  5 08:38:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting