[Fri May 18 20:56:09 2012] Detection parameters:
  Position = (302.4, 276.0) = 6 59 45.51 14 14 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1118.8 +/- 47.3
  Background counts = 54.5
  Rate = 0.03 +/- 0.001

[Fri May 18 20:56:09 2012] Off-axis axis estimate = 1.65'
[Fri May 18 21:05:40 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri May 18 21:05:40 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri May 18 21:05:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Fri May 18 21:05:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.25"
[Fri May 18 21:45:39 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 18 21:45:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2.csv
[Fri May 18 21:45:39 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 18 21:45:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2.csv
[Fri May 18 21:45:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 21:45:39 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 18 21:45:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 21:45:39 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 18 21:45:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 18 21:45:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 22:00:50 2012] Source 2 is offset by 7.079072 and 1.094583 pixels which is larger than
2 X fitted extent = 2.449982 x 2.449982, not incorporating fit results
[Fri May 18 22:00:51 2012] Vigneting correction estimate = 1.000000
[Fri May 18 22:00:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 22:00:51 2012] Assessing source extent using major
[Fri May 18 22:00:51 2012] Source does appear to be extended
[Fri May 18 22:00:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 22:02:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri May 18 22:02:16 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri May 18 22:02:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Fri May 18 22:02:16 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.25"
[Fri May 18 22:30:56 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 18 22:30:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2.csv
[Fri May 18 22:30:56 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 18 22:30:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2.csv
[Fri May 18 22:30:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 22:30:57 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 18 22:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 18 22:30:57 2012] fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 18 22:30:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 18 22:30:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112200101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 22:45:47 2012] Source 2 is offset by 1.886870 and -5.728336 pixels which is larger than
2 X fitted extent = 5.032736 x 5.176506, not incorporating fit results
[Fri May 18 22:45:47 2012] Vigneting correction estimate = 1.000000
[Fri May 18 22:45:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 22:45:47 2012] Assessing source extent using major
[Fri May 18 22:45:47 2012] Source does appear to be extended
[Fri May 18 22:45:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 22:50:53 2012] Counts = 1118.758179, rescaling region sizes by 2.000000
[Fri May 18 22:50:53 2012] XMMSAS src. selection expression = ellipse(26261.109253, 23966.372742, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 18 22:50:53 2012] Writing source region out to fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2_src.reg
[Fri May 18 22:50:53 2012] Extracting stamp from image fullrun_mos1_xmm0112200101_pi300-10000_cl_sm2.00.img.gz, (227, 201) - (377, 351)
[Fri May 18 22:50:53 2012] XMMSAS bgd. selection expression = annulus(26261.109253, 23966.372742, 4350.000000, 8700.000000, X, Y) && !ellipse(25483.301800, 23866.612400, 1353.004839, 1353.004839, 0.000000, X, Y) && !ellipse(17567.754791, 31988.854401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.610199, 21603.144440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22914.000280, 21441.384800, 419.494412, 419.494412, 0.000000, X, Y) && !ellipse(19229.768616, 33294.990753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32108.336029, 23198.461273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28464.892000, 18874.863000, 848.040024, 848.040024, 0.000000, X, Y)
[Fri May 18 22:50:53 2012] Writing fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2.gif
[Fri May 18 22:54:54 2012] Mean detx,y = (-10.17, -319.55) 
[Fri May 18 22:54:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 22:58:00 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 22:58:00 2012] Setting source spectrum file to fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 22:58:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May 18 23:11:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 18 23:11:28 2012] rmf not generated due to insufficient counts
[Fri May 18 23:24:16 2012] Updating aperture counts using extracted products
[Fri May 18 23:24:16 2012] Error reading totcts from fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May 18 23:24:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 23:24:16 2012] Using photon index=1.80, rate=0.0293, arf fullrun_mos1_xmm0112200101_pi300-10000_pass1_cl_src2.arf
[Fri May 18 23:24:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 23:24:16 2012] Updating source flux to 2.7e-13
[Fri May 18 23:24:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting