[Tue Jun 25 03:32:01 2013] Detection parameters:
  Position = (222.6, 280.8) = 20 56 49.12 -4 40 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 8.0
  Background counts = 4.7
  Rate = 0.004 +/- 0.0008

[Tue Jun 25 03:32:02 2013] Off-axis axis estimate = 5.64'
[Tue Jun 25 04:43:08 2013] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:43:08 2013] Initial guess for spatial extent in simple fitting = 9.25"
[Tue Jun 25 04:43:08 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Tue Jun 25 04:43:08 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.25"
[Tue Jun 25 05:15:36 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jun 25 05:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8.csv
[Tue Jun 25 05:15:36 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jun 25 05:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8.csv
[Tue Jun 25 05:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 05:15:36 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jun 25 05:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 25 05:15:36 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jun 25 05:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue Jun 25 05:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 05:15:50 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.669027 pixels away
[Tue Jun 25 05:15:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 05:15:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 05:15:50 2013] Assessing source extent using major
[Tue Jun 25 05:15:50 2013] Source does appear to be extended
[Tue Jun 25 05:15:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 06:23:40 2013] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 06:23:40 2013] Initial guess for spatial extent in simple fitting = 9.25"
[Tue Jun 25 06:23:40 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Tue Jun 25 06:23:40 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.25"
[Tue Jun 25 06:55:47 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jun 25 06:55:47 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jun 25 06:55:47 2013] Fit fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_src8 appears to have run properly
[Tue Jun 25 06:55:47 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jun 25 06:55:47 2013] fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jun 25 06:55:47 2013] Fit fullrun_mos2_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jun 25 06:55:59 2013] Spatial fit model total counts = 81.759600, observed total counts = 76.000000
[Tue Jun 25 06:55:59 2013] Offset between fit and detection position for source 15 = 0.617343 pixels
[Tue Jun 25 06:55:59 2013] 82.605700 total counts/ 51.399400 bgd. counts: snr = 4.352745
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.617343 pixels
  Position = (222.5, 280.2) = 20 56 49.17 -4 40 14.7
  Extent = 9.1 (5.7-13.8)" x 4.3 (2.8-9.3)", rotation angle = 104 (45-175) degrees
  Source counts = 31.2 +/- 9.1
  Background counts = 51.4
  Rate = 0.002 +/- 0.0005
[Tue Jun 25 06:55:59 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:55:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:55:59 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 06:55:59 2013] Source does appear to be extended
[Tue Jun 25 06:55:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.62
[Tue Jun 25 07:34:22 2013] XMMSAS src. selection expression = ellipse(19307.558200, 24328.952000, 545.598016, 258.912607, 103.610417, X, Y)
[Tue Jun 25 07:34:22 2013] Writing source region out to fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_src.reg
[Tue Jun 25 07:34:22 2013] Extracting stamp from image fullrun_mos2_xmm0112190601_pi300-10000_cl_sm2.00.img.gz, (191, 249) - (254, 312)
[Tue Jun 25 07:34:22 2013] XMMSAS bgd. selection expression = annulus(19307.558200, 24328.952000, 909.330026, 1818.660052, X, Y) && !ellipse(20906.877680, 23185.949800, 289.501608, 127.804004, 57.278600, X, Y)
[Tue Jun 25 07:34:22 2013] Writing fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15.gif
[Tue Jun 25 07:36:19 2013] Mean detx,y = (7122.30, -4982.36) 
[Tue Jun 25 07:36:20 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 07:36:37 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 07:36:37 2013] Setting source spectrum file to fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jun 25 07:36:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jun 25 07:48:01 2013] Not generating rmf since there are only 31 counts
[Tue Jun 25 07:48:01 2013] rmf not generated due to insufficient counts
[Tue Jun 25 07:50:05 2013] Updating aperture counts using extracted products
[Tue Jun 25 07:50:05 2013] Total counts from fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 44.00
[Tue Jun 25 07:50:05 2013] Total counts from fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_bgd.pi.gz = 186.00
[Tue Jun 25 07:50:05 2013] Got source and background scale factors 434992.000000, 7098400.000000
[Tue Jun 25 07:50:05 2013] User source parameters:
  Position = (222.5, 280.2) = 20 56 49.17 -4 40 14.7
  Extent = 9.1 (5.7-13.8)" x 4.3 (2.8-9.3)", rotation angle = 104 (45-175) degrees
  Source aperture counts = 32.6 +/- 7.7
  Background aperture counts = 11.4
  Rate = 0.002 +/- 0.0005

[Tue Jun 25 07:50:07 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 07:50:07 2013] Using photon index=1.80, rate=0.00187, arf fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15.arf
[Tue Jun 25 07:50:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 07:50:07 2013] Updating source flux to 3.9e-14
[Tue Jun 25 07:50:10 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 07:50:12 2013] xmm0112190601/analysis//spectral/fullrun_mos2_xmm0112190601_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete