[Tue Jun 25 03:31:39 2013] Detection parameters:
  Position = (131.2, 377.2) = 20 57 15.71 -4 33 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.4 +/- 8.0
  Background counts = 3.2
  Rate = 0.003 +/- 0.0005

[Tue Jun 25 03:31:39 2013] Off-axis axis estimate = 13.40'
[Tue Jun 25 04:15:50 2013] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 04:15:50 2013] Initial guess for spatial extent in simple fitting = 13.13"
[Tue Jun 25 04:15:50 2013] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.747
[Tue Jun 25 04:15:50 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.13"
[Tue Jun 25 04:43:07 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 25 04:43:07 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 25 04:43:07 2013] Fit fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_src11 appears to have run properly
[Tue Jun 25 04:43:07 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 25 04:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 25 04:43:07 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 25 04:43:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jun 25 04:43:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190601_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 05:15:47 2013] Spatial fit model total counts = 55.026100, observed total counts = 56.000000
[Tue Jun 25 05:15:47 2013] Offset between fit and detection position for source 2 = 0.256857 pixels
[Tue Jun 25 05:15:47 2013] 56.494600 total counts/ 14.723800 bgd. counts: snr = 10.885862
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.256857 pixels
  Position = (131.5, 377.1) = 20 57 15.64 -4 33 13.0
  Extent = 13.0 (9.6-17.9)", rotation angle = 289 (281-295) degrees
  Source counts = 41.8 +/- 7.5
  Background counts = 14.7
  Rate = 0.002 +/- 0.0004
[Tue Jun 25 05:15:47 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 05:15:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 05:15:47 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 05:15:47 2013] Source does appear to be extended
[Tue Jun 25 05:15:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.50
[Tue Jun 25 05:15:47 2013] Source is asymmetric
[Tue Jun 25 05:59:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 05:59:17 2013] Initial guess for spatial extent in simple fitting = 8.12"
[Tue Jun 25 05:59:17 2013] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.804
[Tue Jun 25 05:59:17 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.12"
[Tue Jun 25 06:23:39 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 25 06:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11.csv
[Tue Jun 25 06:23:39 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 25 06:23:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11.csv
[Tue Jun 25 06:23:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:23:40 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 25 06:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 25 06:23:40 2013] fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 25 06:23:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jun 25 06:23:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190601_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 06:55:56 2013] Spatial fit model total counts = 73.417200, observed total counts = 50.000000
[Tue Jun 25 06:55:56 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 25 06:55:56 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 06:55:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 06:55:56 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 06:55:56 2013] Source does appear to be extended
[Tue Jun 25 06:55:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.50
[Tue Jun 25 06:55:56 2013] Source is asymmetric
[Tue Jun 25 07:24:55 2013] XMMSAS src. selection expression = ellipse(11390.560400, 32761.510800, 777.258022, 196.923006, 289.380990, X, Y)
[Tue Jun 25 07:24:55 2013] Writing source region out to fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 25 07:24:55 2013] Extracting stamp from image fullrun_mos1_xmm0112190601_pi300-10000_cl_sm2.00.img.gz, (87, 332) - (176, 422)
[Tue Jun 25 07:24:55 2013] XMMSAS bgd. selection expression = annulus(11390.560400, 32761.510800, 1295.430037, 2590.860075, X, Y)
[Tue Jun 25 07:24:55 2013] Writing fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2.gif
[Tue Jun 25 07:27:13 2013] Mean detx,y = (1214.44, -17230.09) 
[Tue Jun 25 07:27:14 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 07:27:43 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 07:27:44 2013] Setting source spectrum file to fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 25 07:27:44 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 25 07:33:41 2013] Not generating rmf since there are only 41 counts
[Tue Jun 25 07:33:41 2013] rmf not generated due to insufficient counts
[Tue Jun 25 07:50:03 2013] Updating aperture counts using extracted products
[Tue Jun 25 07:50:03 2013] Total counts from fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 32.00
[Tue Jun 25 07:50:03 2013] Total counts from fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 180.00
[Tue Jun 25 07:50:03 2013] Got source and background scale factors 329060.000000, 7473515.000000
[Tue Jun 25 07:50:03 2013] User source parameters:
  Position = (131.5, 377.1) = 20 57 15.64 -4 33 13.0
  Extent = 13.0 (9.6-17.9)", rotation angle = 289 (281-295) degrees
  Source aperture counts = 24.1 +/- 6.7
  Background aperture counts = 7.9
  Rate = 0.001 +/- 0.0004

[Tue Jun 25 07:50:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 25 07:50:04 2013] Using photon index=1.80, rate=0.0025, arf fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2.arf
[Tue Jun 25 07:50:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 25 07:50:04 2013] Updating source flux to 1.7e-13
[Tue Jun 25 07:50:09 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Tue Jun 25 07:50:09 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 25 07:50:10 2013] xmm0112190601/analysis//spectral/fullrun_mos1_xmm0112190601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete