[Fri Dec 16 11:50:13 2011] Detection parameters:
  Position = (293.5, 309.0) = 15 35 5.95 1 20 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.4 +/- 10.9
  Background counts = 20.0
  Rate = 0.003 +/- 0.0008

[Fri Dec 16 11:50:13 2011] Off-axis axis estimate = 0.85'
[Fri Dec 16 12:09:50 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:09:50 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Fri Dec 16 12:09:50 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.161
[Fri Dec 16 12:09:50 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 6.85"
[Fri Dec 16 12:19:05 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 16 12:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7.csv
[Fri Dec 16 12:19:05 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 16 12:19:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7.csv
[Fri Dec 16 12:19:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:19:05 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 16 12:19:05 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 16 12:19:05 2011] Fit fullrun_mos1_xmm0112190401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 16 12:31:55 2011] Source 9 is offset by -5.819899 and 5.307021 pixels which is larger than
2 X fitted extent = 0.787559 x 0.787559, not incorporating fit results
[Fri Dec 16 12:31:55 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 12:31:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 12:31:55 2011] Assessing source extent using major
[Fri Dec 16 12:31:55 2011] Source does appear to be extended
[Fri Dec 16 12:31:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 12:48:00 2011] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 12:48:00 2011] Initial guess for spatial extent in simple fitting = 6.85"
[Fri Dec 16 12:48:00 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.161
[Fri Dec 16 12:48:00 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 6.85"
[Fri Dec 16 12:56:55 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7.ximg exists
[Fri Dec 16 12:56:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7.csv
[Fri Dec 16 12:56:55 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Dec 16 12:56:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7.csv
[Fri Dec 16 12:56:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 12:56:55 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 16 12:56:55 2011] fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 16 12:56:55 2011] Fit fullrun_mos1_xmm0112190401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 16 13:07:28 2011] Source 9 is offset by -5.819899 and 5.307021 pixels which is larger than
2 X fitted extent = 0.787559 x 0.787559, not incorporating fit results
[Fri Dec 16 13:07:28 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 13:07:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 13:07:28 2011] Assessing source extent using major
[Fri Dec 16 13:07:28 2011] Source does appear to be extended
[Fri Dec 16 13:07:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 13:21:07 2011] XMMSAS src. selection expression = ellipse(25484.308746, 26835.070831, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 16 13:21:07 2011] Writing source region out to fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9_src.reg
[Fri Dec 16 13:21:07 2011] Extracting stamp from image fullrun_mos1_xmm0112190401_pi300-10000_cl_sm2.00.img.gz, (256, 272) - (331, 347)
[Fri Dec 16 13:21:07 2011] XMMSAS bgd. selection expression = annulus(25484.308746, 26835.070831, 1087.500000, 2175.000000, X, Y) && !ellipse(22499.046906, 25687.771606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.657940, 28034.254840, 1281.896037, 241.498407, 345.730180, X, Y)
[Fri Dec 16 13:21:07 2011] Writing fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9.gif
[Fri Dec 16 13:22:12 2011] Mean detx,y = (-392.04, -1631.67) 
[Fri Dec 16 13:22:13 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 13:22:18 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 13:22:18 2011] Setting source spectrum file to fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 16 13:22:18 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Dec 16 13:22:58 2011] Not generating rmf since there are only 47 counts
[Fri Dec 16 13:22:58 2011] rmf not generated due to insufficient counts
[Fri Dec 16 13:28:03 2011] Updating aperture counts using extracted products
[Fri Dec 16 13:28:03 2011] Error reading totcts from fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 16 13:28:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 13:28:03 2011] Using photon index=1.80, rate=0.0035, arf fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9.arf
[Fri Dec 16 13:28:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 13:28:03 2011] Updating source flux to 3.6e-14
[Fri Dec 16 13:28:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Dec 16 13:28:05 2011] xmm0112190401/analysis//spectral/fullrun_mos1_xmm0112190401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete