[Tue Jul  3 04:44:57 2012] Detection parameters:
  Position = (458.3, 413.6) = 12 10 16.56 39 18 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 7.9
  Background counts = 5.4
  Rate = 0.002 +/- 0.0006

[Tue Jul  3 04:44:57 2012] Off-axis axis estimate = 14.28'
[Tue Jul  3 06:11:33 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 06:11:33 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Tue Jul  3 06:11:33 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.935
[Tue Jul  3 06:11:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.57"
[Tue Jul  3 06:58:34 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jul  3 06:58:34 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jul  3 06:58:34 2012] Fit fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_src27 appears to have run properly
[Tue Jul  3 06:58:35 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jul  3 06:58:35 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jul  3 06:58:35 2012] Fit fullrun_mos2_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jul  3 06:58:48 2012] Spatial fit model total counts = 132.709000, observed total counts = 132.000000
[Tue Jul  3 06:58:48 2012] Offset between fit and detection position for source 18 = 3.477190 pixels
[Tue Jul  3 06:58:48 2012] 131.878500 total counts/ 18.773500 bgd. counts: snr = 26.104127
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.477190 pixels
  Position = (460.7, 411.0) = 12 10 15.68 39 18 3.9
  Extent = 27.1 (27.1-54.3)", rotation angle = 0
  Source counts = 113.1 +/- 11.5
  Background counts = 18.8
  Rate = 0.008 +/- 0.0008
[Tue Jul  3 06:58:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 06:58:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 06:58:48 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 06:58:48 2012] Source does appear to be extended
[Tue Jul  3 06:58:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 08:18:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 08:18:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 08:18:23 2012] Initial guess for spatial extent in simple fitting = 27.14"
[Tue Jul  3 08:18:23 2012] source mask rpix=6.2, npix_max = 181, mask sum = 182, frac = 1.002
[Tue Jul  3 08:18:23 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 27.14"
[Tue Jul  3 09:09:41 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jul  3 09:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26.csv
[Tue Jul  3 09:09:41 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jul  3 09:09:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26.csv
[Tue Jul  3 09:09:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:09:42 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jul  3 09:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jul  3 09:09:42 2012] fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jul  3 09:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jul  3 09:09:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:09:55 2012] Warning, spatial fit 26 centroid is now closest to src. 7
[Tue Jul  3 09:09:55 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:09:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:09:55 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 09:09:55 2012] Source does appear to be extended
[Tue Jul  3 09:09:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 10:06:53 2012] XMMSAS src. selection expression = ellipse(40030.436000, 35712.236000, 1628.490047, 1628.490047, 0.000000, X, Y)
[Tue Jul  3 10:06:53 2012] Writing source region out to fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18_src.reg
[Tue Jul  3 10:06:53 2012] Extracting stamp from image fullrun_mos2_xmm0112190201_pi300-10000_cl_sm2.00.img.gz, (367, 317) - (554, 505)
[Tue Jul  3 10:06:53 2012] XMMSAS bgd. selection expression = annulus(40030.436000, 35712.236000, 2714.150078, 5428.300156, X, Y) && !ellipse(36975.245400, 35370.056400, 398.332811, 236.084007, 231.216000, X, Y) && !ellipse(35811.633600, 35171.099160, 205.112173, 205.112173, 0.000000, X, Y)
[Tue Jul  3 10:06:53 2012] Writing fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18.gif
[Tue Jul  3 10:15:14 2012] Mean detx,y = (-15622.43, 1652.16) 
[Tue Jul  3 10:15:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 10:16:03 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 10:16:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jul  3 10:16:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jul  3 10:49:56 2012] Updating aperture counts using extracted products
[Tue Jul  3 10:49:56 2012] Error reading totcts from fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jul  3 10:49:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 10:49:56 2012] Using photon index=1.80, rate=0.00806, arf fullrun_mos2_xmm0112190201_pi300-10000_pass1_cl_src18.arf
[Tue Jul  3 10:49:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 10:49:56 2012] Updating source flux to 1.8e-13