[Tue Jul  3 04:44:40 2012] Detection parameters:
  Position = (434.6, 256.8) = 12 10 25.58 39 6 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 7.6
  Background counts = 3.1
  Rate = 0.002 +/- 0.0005

[Tue Jul  3 04:44:40 2012] Off-axis axis estimate = 10.32'
[Tue Jul  3 05:22:35 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 05:22:35 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Tue Jul  3 05:22:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 41, frac = 1.024
[Tue Jul  3 05:22:35 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.59"
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31.csv
[Tue Jul  3 06:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul  3 06:11:33 2012] Fit fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Jul  3 06:58:44 2012] Spatial fit model total counts = 63.079600, observed total counts = 62.000000
[Tue Jul  3 06:58:44 2012] Offset between fit and detection position for source 35 = 0.872375 pixels
[Tue Jul  3 06:58:44 2012] 63.704200 total counts/ 29.945800 bgd. counts: snr = 6.168988
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.872375 pixels
  Position = (433.8, 256.4) = 12 10 25.88 39 6 51.4
  Extent = 8.1 (4.1-11.3)", rotation angle = 0
  Source counts = 33.8 +/- 8.0
  Background counts = 29.9
  Rate = 0.002 +/- 0.0006
[Tue Jul  3 06:58:44 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 06:58:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 06:58:44 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 06:58:44 2012] Source does appear to be extended
[Tue Jul  3 06:58:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 07:37:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 07:37:16 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jul  3 07:37:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Tue Jul  3 07:37:16 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 8.13"
[Tue Jul  3 08:18:22 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jul  3 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29.csv
[Tue Jul  3 08:18:22 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jul  3 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29.csv
[Tue Jul  3 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 08:18:23 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jul  3 08:18:23 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jul  3 08:18:23 2012] Fit fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Jul  3 09:09:51 2012] Warning, spatial fit 29 centroid is now closest to src. 31
[Tue Jul  3 09:09:51 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:09:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:09:51 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 09:09:51 2012] Source does appear to be extended
[Tue Jul  3 09:09:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 09:47:39 2012] XMMSAS src. selection expression = ellipse(37694.641740, 22254.544000, 487.621814, 487.621814, 0.000000, X, Y)
[Tue Jul  3 09:47:39 2012] Writing source region out to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35_src.reg
[Tue Jul  3 09:47:39 2012] Extracting stamp from image fullrun_mos1_xmm0112190201_pi300-10000_cl_sm2.00.img.gz, (406, 228) - (462, 284)
[Tue Jul  3 09:47:39 2012] XMMSAS bgd. selection expression = annulus(37694.641740, 22254.544000, 812.703023, 1625.406047, X, Y) && !ellipse(37168.887160, 24059.102180, 639.544018, 639.544018, 0.000000, X, Y)
[Tue Jul  3 09:47:39 2012] Writing fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35.gif
[Tue Jul  3 09:52:36 2012] Mean detx,y = (-9645.82, 7823.23) 
[Tue Jul  3 09:52:36 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 09:52:46 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 09:52:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jul  3 09:52:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jul  3 10:06:03 2012] Not generating rmf since there are only 33 counts
[Tue Jul  3 10:06:03 2012] rmf not generated due to insufficient counts
[Tue Jul  3 10:49:55 2012] Updating aperture counts using extracted products
[Tue Jul  3 10:49:55 2012] Error reading totcts from fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jul  3 10:49:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 10:49:55 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src35.arf
[Tue Jul  3 10:49:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 10:49:55 2012] Updating source flux to 5.4e-14
[Tue Jul  3 10:49:58 2012] Source 35 has fewer than 100.000000 counts, skipping spectral fitting