[Tue Jul  3 04:44:39 2012] Detection parameters:
  Position = (231.7, 489.0) = 12 11 41.54 39 23 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.0 +/- 7.5
  Background counts = 3.4
  Rate = 0.002 +/- 0.0005

[Tue Jul  3 04:44:40 2012] Off-axis axis estimate = 14.64'
[Tue Jul  3 05:22:35 2012] Using EEF radius (= 13.75 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 05:22:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 05:22:35 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Tue Jul  3 05:22:35 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.045
[Tue Jul  3 05:22:35 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 13.75"
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35.csv
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35.csv
[Tue Jul  3 06:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jul  3 06:11:33 2012] Fit fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Jul  3 06:58:44 2012] Spatial fit model total counts = 71.689800, observed total counts = 72.000000
[Tue Jul  3 06:58:44 2012] Offset between fit and detection position for source 2 = 0.373012 pixels
[Tue Jul  3 06:58:44 2012] 70.526400 total counts/ 49.502800 bgd. counts: snr = 2.988080
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.373012 pixels
  Position = (231.3, 489.0) = 12 11 41.68 39 23 43.9
  Extent = 6.1 (3.8-10.0)", rotation angle = 0
  Source counts = 21.0 +/- 8.4
  Background counts = 49.5
  Rate = 0.002 +/- 0.0006
[Tue Jul  3 06:58:44 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 06:58:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 06:58:44 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 06:58:44 2012] Source does appear to be extended
[Tue Jul  3 06:58:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 07:37:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 07:37:16 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Tue Jul  3 07:37:16 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.097
[Tue Jul  3 07:37:16 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 6.13"
[Tue Jul  3 08:18:22 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jul  3 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33.csv
[Tue Jul  3 08:18:22 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jul  3 08:18:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33.csv
[Tue Jul  3 08:18:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 08:18:23 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jul  3 08:18:23 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jul  3 08:18:23 2012] Fit fullrun_mos1_xmm0112190201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Jul  3 09:09:51 2012] Spatial fit model total counts = 53.584700, observed total counts = 53.000000
[Tue Jul  3 09:09:51 2012] Offset between fit and detection position for source 2 = 0.117863 pixels
[Tue Jul  3 09:09:51 2012] 53.473900 total counts/ 30.848600 bgd. counts: snr = 4.073583
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.117863 pixels
  Position = (231.4, 489.1) = 12 11 41.65 39 23 44.2
  Extent = 6.0 (4.6-10.7)", rotation angle = 0
  Source counts = 22.6 +/- 7.3
  Background counts = 30.8
  Rate = 0.002 +/- 0.0005
[Tue Jul  3 09:09:51 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 09:09:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 09:09:51 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 09:09:51 2012] Source does appear to be extended
[Tue Jul  3 09:09:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 09:47:39 2012] XMMSAS src. selection expression = ellipse(20081.265800, 42501.943800, 362.940610, 362.940610, 0.000000, X, Y)
[Tue Jul  3 09:47:39 2012] Writing source region out to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul  3 09:47:39 2012] Extracting stamp from image fullrun_mos1_xmm0112190201_pi300-10000_cl_sm2.00.img.gz, (211, 468) - (252, 510)
[Tue Jul  3 09:47:39 2012] XMMSAS bgd. selection expression = annulus(20081.265800, 42501.943800, 604.901017, 1209.802035, X, Y) && !ellipse(21052.032400, 42883.684000, 595.998417, 595.998417, 0.000000, X, Y)
[Tue Jul  3 09:47:39 2012] Writing fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2.gif
[Tue Jul  3 09:53:10 2012] Mean detx,y = (16108.07, 193.87) 
[Tue Jul  3 09:53:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 09:53:16 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 09:53:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul  3 09:53:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul  3 10:06:22 2012] Not generating rmf since there are only 22 counts
[Tue Jul  3 10:06:22 2012] rmf not generated due to insufficient counts
[Tue Jul  3 10:49:55 2012] Updating aperture counts using extracted products
[Tue Jul  3 10:49:55 2012] Error reading totcts from fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul  3 10:49:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 10:49:55 2012] Using photon index=1.80, rate=0.00162, arf fullrun_mos1_xmm0112190201_pi300-10000_pass1_cl_src2.arf
[Tue Jul  3 10:49:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 10:49:55 2012] Updating source flux to 5.4e-14
[Tue Jul  3 10:49:58 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting