[Tue Jul  3 04:44:39 2012] Detection parameters:
  Position = (240.4, 399.7) = 12 11 38.22 39 17 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.0 +/- 6.0
  Background counts = 3.4
  Rate = 0.003 +/- 0.0007

[Tue Jul  3 04:44:40 2012] Off-axis axis estimate = 8.46'
[Tue Jul  3 05:22:35 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 05:22:35 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Tue Jul  3 05:22:35 2012] source mask rpix=2.5, npix_max = 34, mask sum = 32, frac = 0.919
[Tue Jul  3 05:22:35 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.66"
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30.csv
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Jul  3 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30.csv
[Tue Jul  3 06:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Jul  3 06:11:33 2012] fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jul  3 06:11:33 2012] Fit fullrun_mos1_xmm0112190201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Jul  3 06:58:44 2012] Spatial fit model total counts = 69.931300, observed total counts = 67.000000
[Tue Jul  3 06:58:44 2012] Offset between fit and detection position for source 10 = 4.683304 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.683304 pixels
  Position = (243.4, 396.1) = 12 11 37.10 39 16 59.9
  Extent = 18.2 (13.1-21.3)", rotation angle = 0
  Source counts = 69.0 +/- 8.3
  Background counts = 0.0
  Rate = 0.005 +/- 0.0006
 Deleting source due to low signal-to-noise ratio