[Thu Aug 23 21:54:25 2012] Detection parameters:
  Position = (302.3, 275.2) = 8 15 18.92 -49 13 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36789.7 +/- 227.1
  Background counts = 20.5
  Rate = 2 +/- 0.01

[Thu Aug 23 21:54:26 2012] Off-axis axis estimate = 1.70'
[Thu Aug 23 21:56:23 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 21:56:23 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 23 21:56:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Thu Aug 23 21:56:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Aug 23 23:53:47 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 23 23:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 23:53:47 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 23 23:53:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1.csv
[Thu Aug 23 23:53:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 23:53:47 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 23 23:53:47 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 23 23:53:47 2012] Fit fullrun_pn_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 24 00:43:07 2012] Spatial fit model total counts = 32822.400000, observed total counts = 32741.000000
[Fri Aug 24 00:43:07 2012] Offset between fit and detection position for source 1 = 0.242239 pixels
[Fri Aug 24 00:43:07 2012] 32904.400000 total counts/ 6578.500000 bgd. counts: snr = 324.578529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.242239 pixels
  Position = (302.2, 275.5) = 8 15 18.97 -49 13 21.6
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 26325.9 +/- 181.4
  Background counts = 6578.5
  Rate = 1 +/- 0.01
[Fri Aug 24 00:43:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 00:43:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 00:43:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 00:43:07 2012] Source does appear to be extended
[Fri Aug 24 00:43:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 00:43:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 00:43:23 2012] Initial guess for spatial extent in simple fitting = 5.96"
[Fri Aug 24 00:43:23 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.859
[Fri Aug 24 00:43:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.96"
[Fri Aug 24 03:02:59 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 24 03:02:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:02:59 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 24 03:02:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:02:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:03:00 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 24 03:03:00 2012] fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 24 03:03:00 2012] Fit fullrun_pn_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 24 03:37:27 2012] Spatial fit model total counts = 32853.900000, observed total counts = 32741.000000
[Fri Aug 24 03:37:27 2012] Offset between fit and detection position for source 1 = 0.001121 pixels
[Fri Aug 24 03:37:27 2012] 32934.260000 total counts/ 6598.460000 bgd. counts: snr = 324.209115
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001121 pixels
  Position = (302.2, 275.5) = 8 15 18.97 -49 13 21.6
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 26335.8 +/- 181.5
  Background counts = 6598.5
  Rate = 1 +/- 0.01
[Fri Aug 24 03:37:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 03:37:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 03:37:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 03:37:27 2012] Source does appear to be extended
[Fri Aug 24 03:37:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:37:39 2012] Counts = 26335.800000, rescaling region sizes by 3.000000
[Fri Aug 24 03:37:39 2012] XMMSAS src. selection expression = ellipse(26244.759700, 23916.956800, 1072.278031, 1072.278031, 0.000000, X, Y)
[Fri Aug 24 03:37:39 2012] Writing source region out to fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 24 03:37:39 2012] Extracting stamp from image fullrun_pn_xmm0111971001_pi300-10000_cl_sm2.00.img.gz, (241, 214) - (364, 337)
[Fri Aug 24 03:37:39 2012] XMMSAS bgd. selection expression = annulus(26244.759700, 23916.956800, 5361.390154, 10722.780309, X, Y) && !ellipse(19194.003240, 32844.633600, 451.084013, 451.084013, 0.000000, X, Y) && !ellipse(25715.893677, 17721.492935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19501.954254, 16734.026474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.297206, 34356.513000, 405.888012, 346.365610, 246.149000, X, Y) && !ellipse(16599.030000, 33278.056000, 1762.336051, 1762.336051, 0.000000, X, Y) && !ellipse(17364.002000, 32686.186000, 1703.848049, 1703.848049, 0.000000, X, Y) && !ellipse(33784.381683, 32149.632355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17994.874000, 31974.448000, 1645.936047, 1645.936047, 0.000000, X, Y) && !ellipse(18473.768936, 31457.965363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.369155, 31028.187429, 1550.528045, 457.848856, 46.411001, X, Y) && !ellipse(19566.457286, 30444.931702, 1321.304038, 436.950653, 43.386612, X, Y) && !ellipse(20054.718400, 29961.140000, 1882.384054, 476.497614, 45.154000, X, Y) && !ellipse(24255.280400, 29995.507400, 432.209612, 432.209612, 0.000000, X, Y) && !ellipse(20441.204000, 29616.804000, 2027.480058, 726.580021, 54.281922, X, Y) && !ellipse(21067.519200, 28983.257200, 1835.608053, 426.048012, 44.699000, X, Y) && !ellipse(36174.123108, 14994.359680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.248800, 15107.544200, 486.568014, 486.568014, 0.000000, X, Y) && !ellipse(21210.932311, 28846.701972, 1312.056038, 523.554617, 44.784159, X, Y) && !ellipse(22248.868000, 27811.068000, 1262.512036, 1262.512036, 0.000000, X, Y) && !ellipse(22690.382209, 27406.593509, 1167.144034, 593.566899, 38.760667, X, Y) && !ellipse(21070.058800, 27405.083200, 379.870411, 379.870411, 0.000000, X, Y) && !ellipse(23278.364000, 26832.296000, 1135.504033, 1135.504033, 0.000000, X, Y) && !ellipse(23954.830000, 26093.784000, 2429.520070, 2429.520070, 0.000000, X, Y) && !ellipse(24436.427094, 25702.360992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28697.308380, 25667.314606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.844000, 25357.564000, 1214.760035, 1214.760035, 0.100000, X, Y) && !ellipse(22687.848694, 22244.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17107.680695, 21406.243484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21365.000259, 21105.599915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.056000, 19309.104400, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(21821.820600, 18927.720000, 761.471222, 761.471222, 0.000000, X, Y) && !ellipse(19918.001328, 18587.033813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30073.922485, 18506.072678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28960.936859, 18063.831085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34670.667440, 17538.093600, 591.699217, 591.699217, 0.000000, X, Y) && !ellipse(29282.622864, 17272.766434, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 03:37:39 2012] Writing fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1.gif
[Fri Aug 24 03:37:56 2012] Mean detx,y = (140.41, -148.56) 
[Fri Aug 24 03:38:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 03:42:20 2012] grppha failed
[Fri Aug 24 03:42:20 2012] Setting source spectrum file to fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 03:42:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 24 04:31:26 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:31:26 2012] Error reading totcts from fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 04:31:26 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:31:30 2012] Source 1 has no response, skipping
[Fri Aug 24 04:31:31 2012] xmm0111971001/analysis//spectral/fullrun_pn_xmm0111971001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete