[Thu Aug 23 21:54:48 2012] Detection parameters:
  Position = (302.0, 275.2) = 8 15 19.05 -49 13 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12318.2 +/- 133.3
  Background counts = 6.3
  Rate = 0.6 +/- 0.006

[Thu Aug 23 21:54:49 2012] Off-axis axis estimate = 1.70'
[Thu Aug 23 23:53:48 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 23:53:48 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Aug 23 23:53:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Aug 23 23:53:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Aug 24 00:20:57 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 24 00:20:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 00:20:57 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 24 00:20:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1.csv
[Fri Aug 24 00:20:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 00:20:57 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 24 00:20:57 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 24 00:20:57 2012] Fit fullrun_mos1_xmm0111971001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 24 00:43:11 2012] Spatial fit model total counts = 10665.000000, observed total counts = 10665.000000
[Fri Aug 24 00:43:11 2012] Offset between fit and detection position for source 1 = 0.164734 pixels
[Fri Aug 24 00:43:11 2012] 10692.040000 total counts/ 2153.310000 bgd. counts: snr = 184.009397
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.164734 pixels
  Position = (302.1, 275.4) = 8 15 19.04 -49 13 22.1
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 8538.7 +/- 103.4
  Background counts = 2153.3
  Rate = 0.4 +/- 0.005
[Fri Aug 24 00:43:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 00:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 00:43:11 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 00:43:11 2012] Source does appear to be extended
[Fri Aug 24 00:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 03:03:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 03:03:01 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Fri Aug 24 03:03:01 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.939
[Fri Aug 24 03:03:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.60"
[Fri Aug 24 03:21:14 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 24 03:21:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:21:14 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 24 03:21:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1.csv
[Fri Aug 24 03:21:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 03:21:14 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 24 03:21:14 2012] fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 24 03:21:14 2012] Fit fullrun_mos1_xmm0111971001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 24 03:37:29 2012] Spatial fit model total counts = 10665.000000, observed total counts = 10665.000000
[Fri Aug 24 03:37:29 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Fri Aug 24 03:37:29 2012] 10692.040000 total counts/ 2153.310000 bgd. counts: snr = 184.009397
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (302.1, 275.4) = 8 15 19.04 -49 13 22.1
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 8538.7 +/- 103.4
  Background counts = 2153.3
  Rate = 0.4 +/- 0.005
[Fri Aug 24 03:37:29 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 03:37:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 03:37:29 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 03:37:29 2012] Source does appear to be extended
[Fri Aug 24 03:37:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 04:25:08 2012] Counts = 8538.730000, rescaling region sizes by 2.000000
[Fri Aug 24 04:25:08 2012] XMMSAS src. selection expression = ellipse(26230.924500, 23908.418200, 672.049219, 672.049219, 0.000000, X, Y)
[Fri Aug 24 04:25:08 2012] Writing source region out to fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 24 04:25:08 2012] Extracting stamp from image fullrun_mos1_xmm0111971001_pi300-10000_cl_sm2.00.img.gz, (263, 237) - (341, 314)
[Fri Aug 24 04:25:08 2012] XMMSAS bgd. selection expression = annulus(26230.924500, 23908.418200, 2240.164064, 4480.328129, X, Y)
[Fri Aug 24 04:25:08 2012] Writing fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1.gif
[Fri Aug 24 04:25:11 2012] Mean detx,y = (223.61, -159.09) 
[Fri Aug 24 04:25:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 04:25:28 2012] grppha failed
[Fri Aug 24 04:25:28 2012] Setting source spectrum file to fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 04:25:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 24 04:31:26 2012] Updating aperture counts using extracted products
[Fri Aug 24 04:31:26 2012] Error reading totcts from fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 24 04:31:27 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 04:31:28 2012] Source 1 has no response, skipping
[Fri Aug 24 04:31:29 2012] xmm0111971001/analysis//spectral/fullrun_mos1_xmm0111971001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete