[Sun Aug 26 18:12:38 2012] Detection parameters:
  Position = (314.8, 285.9) = 8 12 28.24 62 34 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.8 +/- 18.3
  Background counts = 68.5
  Rate = 0.01 +/- 0.002

[Sun Aug 26 18:12:38 2012] Off-axis axis estimate = 1.49'
[Sun Aug 26 18:14:33 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 18:14:33 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Aug 26 18:14:33 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.866
[Sun Aug 26 18:14:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.18"
[Sun Aug 26 19:13:00 2012] fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5.ximg exists
[Sun Aug 26 19:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5.csv
[Sun Aug 26 19:13:00 2012] fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Aug 26 19:13:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5.csv
[Sun Aug 26 19:13:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:13:00 2012] fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Aug 26 19:13:00 2012] fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Aug 26 19:13:00 2012] Fit fullrun_pn_xmm0111970801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Aug 26 19:18:41 2012] Source 5 is offset by -0.388506 and -6.652551 pixels which is larger than
2 X fitted extent = 4.140382 x 4.140382, not incorporating fit results
[Sun Aug 26 19:18:41 2012] Spatial fit model total counts = 162.963000, observed total counts = 163.000000
[Sun Aug 26 19:18:41 2012] Offset between fit and detection position for source 5 = 0.921137 pixels
[Sun Aug 26 19:18:41 2012] Warning, changing simple spatial fit ID from 5 to 6
[Sun Aug 26 19:18:41 2012] 142.177700 total counts/ 131.213000 bgd. counts: snr = 0.957212
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.921137 pixels
  Position = (315.0, 285.0) = 8 12 28.16 62 34 15.8
  Extent = 2.3 (1.8-5.3)", rotation angle = 0
  Source counts = 11.0 +/- 11.9
  Background counts = 131.2
  Rate = 0.006 +/- 0.007
  Deleting source due to low Poisson probability