[Mon May 28 10:09:26 2012] Detection parameters:
  Position = (367.0, 176.9) = 11 38 8.36 3 11 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 12.1
  Background counts = 11.9
  Rate = 0.007 +/- 0.001

[Mon May 28 10:09:27 2012] Off-axis axis estimate = 10.11'
[Mon May 28 10:11:03 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Mon May 28 10:11:03 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Mon May 28 10:11:03 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Mon May 28 10:11:03 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.49"
[Mon May 28 11:53:58 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 28 11:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15.csv
[Mon May 28 11:53:58 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 28 11:53:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15.csv
[Mon May 28 11:53:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:53:58 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 28 11:53:58 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 28 11:53:58 2012] Fit fullrun_pn_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 28 12:26:28 2012] Spatial fit model total counts = 309.605000, observed total counts = 310.000000
[Mon May 28 12:26:28 2012] Offset between fit and detection position for source 15 = 0.322913 pixels
[Mon May 28 12:26:28 2012] Warning, changing simple spatial fit ID from 15 to 14
[Mon May 28 12:26:28 2012] 274.029600 total counts/ 230.317000 bgd. counts: snr = 2.880339
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.322913 pixels
  Position = (366.8, 177.2) = 11 38 8.42 3 11 41.2
  Extent = 7.9 (4.2-13.2)", rotation angle = 0
  Source counts = 43.7 +/- 16.6
  Background counts = 230.3
  Rate = 0.004 +/- 0.002
[Mon May 28 12:26:28 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:26:28 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:26:28 2012] Source does appear to be extended
[Mon May 28 12:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:26:28 2012] Source is confused with source 3
[Mon May 28 12:26:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 12:26:39 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Mon May 28 12:26:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.170
[Mon May 28 12:26:39 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.88"
[Mon May 28 14:27:49 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 28 14:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15.csv
[Mon May 28 14:27:49 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 28 14:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15.csv
[Mon May 28 14:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:27:50 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 28 14:27:50 2012] fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 28 14:27:50 2012] Fit fullrun_pn_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 28 14:38:45 2012] Warning, spatial fit 15 centroid is now closest to src. 14
[Mon May 28 14:38:45 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:38:45 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:38:45 2012] Source does appear to be extended
[Mon May 28 14:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:38:54 2012] XMMSAS src. selection expression = ellipse(31862.442000, 15368.262000, 472.665014, 472.665014, 0.000000, X, Y)
[Mon May 28 14:38:54 2012] Writing source region out to fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15_src.reg
[Mon May 28 14:38:54 2012] Extracting stamp from image fullrun_pn_xmm0111970701_pi300-10000_cl_sm2.00.img.gz, (340, 150) - (394, 204)
[Mon May 28 14:38:54 2012] XMMSAS bgd. selection expression = annulus(31862.442000, 15368.262000, 787.775023, 1575.550045, X, Y) && !ellipse(32043.724800, 14876.020200, 876.888025, 876.888025, 0.000000, X, Y) && !ellipse(30965.671862, 17309.928277, 2410.928069, 438.229112, 67.531474, X, Y) && !ellipse(31013.089029, 17177.948631, 1697.672049, 713.255546, 90.000000, X, Y) && !ellipse(31479.748000, 16127.924600, 1797.632052, 412.543212, 66.199800, X, Y) && !ellipse(31633.108000, 15849.086000, 1260.440036, 1260.440036, 0.000000, X, Y) && !ellipse(30549.998000, 18318.298000, 1700.120049, 1700.120049, 0.000000, X, Y) && !ellipse(31165.196000, 16863.316000, 1608.624046, 1608.624046, 0.000000, X, Y)
[Mon May 28 14:38:54 2012] Writing fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15.gif
[Mon May 28 14:51:09 2012] Mean detx,y = (134.32, 13549.75) 
[Mon May 28 14:51:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 14:51:28 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 14:51:28 2012] Setting source spectrum file to fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 14:51:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon May 28 15:25:26 2012] Not generating rmf since there are only 43 counts
[Mon May 28 15:25:26 2012] rmf not generated due to insufficient counts
[Mon May 28 16:40:03 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:03 2012] Error reading totcts from fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 16:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:04 2012] Using photon index=1.80, rate=0.00437, arf fullrun_pn_xmm0111970701_pi300-10000_pass1_cl_src15.arf
[Mon May 28 16:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:04 2012] Updating source flux to 2.7e-14
[Mon May 28 16:40:29 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Mon May 28 16:40:29 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting