[Mon May 28 10:10:04 2012] Detection parameters:
  Position = (303.4, 320.8) = 11 38 26.84 3 22 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15151.9 +/- 144.6
  Background counts = 6.1
  Rate = 1 +/- 0.01

[Mon May 28 10:10:04 2012] Off-axis axis estimate = 1.66'
[Mon May 28 12:07:03 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon May 28 12:07:03 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon May 28 12:07:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Mon May 28 12:07:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon May 28 12:26:18 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 12:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:26:18 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 12:26:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:26:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:26:19 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 12:26:19 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 12:26:19 2012] Fit fullrun_mos2_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 12:26:32 2012] Spatial fit model total counts = 13826.100000, observed total counts = 13358.000000
[Mon May 28 12:26:32 2012] Offset between fit and detection position for source 1 = 0.223067 pixels
[Mon May 28 12:26:32 2012] 13903.390000 total counts/ 3429.690000 bgd. counts: snr = 178.843309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223067 pixels
  Position = (303.2, 320.7) = 11 38 26.89 3 22 5.3
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 10473.7 +/- 117.9
  Background counts = 3429.7
  Rate = 0.9 +/- 0.01
[Mon May 28 12:26:32 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:26:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:26:32 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:26:32 2012] Source does appear to be extended
[Mon May 28 12:26:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:33:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 14:33:17 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Mon May 28 14:33:17 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.038
[Mon May 28 14:33:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.22"
[Mon May 28 14:38:36 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 14:38:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1.csv
[Mon May 28 14:38:36 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 14:38:36 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1.csv
[Mon May 28 14:38:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:38:36 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 14:38:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 14:38:36 2012] fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 14:38:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 14:38:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:38:47 2012] Warning, spatial fit 1 centroid is now closest to src. 3
[Mon May 28 14:38:47 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:38:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:38:47 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:38:47 2012] Source does appear to be extended
[Mon May 28 14:38:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 16:33:52 2012] Counts = 10473.700000, rescaling region sizes by 3.000000
[Mon May 28 16:33:52 2012] XMMSAS src. selection expression = ellipse(26328.792260, 27848.805000, 939.632427, 939.632427, 0.000000, X, Y)
[Mon May 28 16:33:52 2012] Writing source region out to fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 16:33:52 2012] Extracting stamp from image fullrun_mos2_xmm0111970701_pi300-10000_cl_sm2.00.img.gz, (249, 267) - (357, 375)
[Mon May 28 16:33:52 2012] XMMSAS bgd. selection expression = annulus(26328.792260, 27848.805000, 4698.162135, 9396.324270, X, Y) && !ellipse(33237.766907, 19270.029480, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 16:33:52 2012] Writing fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1.gif
[Mon May 28 16:33:55 2012] Mean detx,y = (52.49, -24.76) 
[Mon May 28 16:33:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:35:49 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:35:49 2012] Setting source spectrum file to fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:35:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 16:40:04 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:04 2012] Error reading totcts from fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:04 2012] Using photon index=1.80, rate=0.854, arf fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:04 2012] Updating source flux to 8.6e-12
[Mon May 28 16:40:29 2012] Reading fit data from xmm0111970701/analysis//spectral/fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 16:40:29 2012] Spectral fit parameter nH value = 8.68593e+20
[Mon May 28 16:40:29 2012] Spectral fit parameter PhoIndex value = 2.11291
[Mon May 28 16:40:29 2012] Failed to get F(0.3-8.0) from xmm0111970701/analysis//spectral/fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 16:40:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:29 2012] Using Nh = 8.7e+20, photon index=2.11, rate=0.854, arf fullrun_mos2_xmm0111970701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:40:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:29 2012] Updating source flux to 8.2e-12