[Mon May 28 10:09:47 2012] Detection parameters:
  Position = (275.1, 429.7) = 11 38 35.04 3 29 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.4 +/- 12.3
  Background counts = 3.4
  Rate = 0.01 +/- 0.002

[Mon May 28 10:09:47 2012] Off-axis axis estimate = 9.67'
[Mon May 28 11:53:58 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:53:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 11:53:58 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon May 28 11:53:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.786
[Mon May 28 11:53:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.26"
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2.csv
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2.csv
[Mon May 28 12:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon May 28 12:07:02 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon May 28 12:26:30 2012] Spatial fit model total counts = 111.279000, observed total counts = 116.000000
[Mon May 28 12:26:30 2012] Offset between fit and detection position for source 5 = 0.178226 pixels
[Mon May 28 12:26:30 2012] 113.503100 total counts/ 54.225500 bgd. counts: snr = 8.049869
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.178226 pixels
  Position = (275.1, 429.6) = 11 38 35.06 3 29 59.0
  Extent = 4.3 (3.4-5.1)", rotation angle = 0
  Source counts = 59.3 +/- 10.7
  Background counts = 54.2
  Rate = 0.005 +/- 0.0009
[Mon May 28 12:26:30 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:26:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:26:30 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:26:30 2012] Source does appear to be extended
[Mon May 28 12:26:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:27:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 14:27:50 2012] Initial guess for spatial extent in simple fitting = 4.27"
[Mon May 28 14:27:50 2012] source mask rpix=1.0, npix_max = 8, mask sum = 8, frac = 0.910
[Mon May 28 14:27:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.27"
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 14:33:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2.csv
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 14:33:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2.csv
[Mon May 28 14:33:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 14:33:17 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 14:38:46 2012] Spatial fit model total counts = 111.281000, observed total counts = 116.000000
[Mon May 28 14:38:46 2012] Offset between fit and detection position for source 5 = 0.000020 pixels
[Mon May 28 14:38:46 2012] 113.504800 total counts/ 54.221700 bgd. counts: snr = 8.050898
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000020 pixels
  Position = (275.1, 429.6) = 11 38 35.06 3 29 59.0
  Extent = 4.3 (3.4-5.1)", rotation angle = 0
  Source counts = 59.3 +/- 10.7
  Background counts = 54.2
  Rate = 0.005 +/- 0.0009
[Mon May 28 14:38:46 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:38:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:38:46 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:38:46 2012] Source does appear to be extended
[Mon May 28 14:38:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 16:22:21 2012] XMMSAS src. selection expression = ellipse(23880.882560, 37324.485800, 256.506607, 256.506607, 0.000000, X, Y)
[Mon May 28 16:22:21 2012] Writing source region out to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5_src.reg
[Mon May 28 16:22:21 2012] Extracting stamp from image fullrun_mos1_xmm0111970701_pi300-10000_cl_sm2.00.img.gz, (260, 415) - (290, 444)
[Mon May 28 16:22:21 2012] XMMSAS bgd. selection expression = annulus(23880.882560, 37324.485800, 427.511012, 855.022025, X, Y)
[Mon May 28 16:22:21 2012] Writing fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5.gif
[Mon May 28 16:24:28 2012] Mean detx,y = (9867.71, 1324.71) 
[Mon May 28 16:24:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:24:35 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:24:36 2012] Setting source spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 28 16:24:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 28 16:33:30 2012] Not generating rmf since there are only 59 counts
[Mon May 28 16:33:30 2012] rmf not generated due to insufficient counts
[Mon May 28 16:40:04 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:04 2012] Error reading totcts from fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 28 16:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:04 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src5.arf
[Mon May 28 16:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:04 2012] Updating source flux to 1.2e-13
[Mon May 28 16:40:06 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting