[Mon May 28 10:09:47 2012] Detection parameters:
  Position = (245.7, 231.2) = 11 38 43.58 3 15 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 10.4
  Background counts = 5.0
  Rate = 0.009 +/- 0.001

[Mon May 28 10:09:47 2012] Off-axis axis estimate = 6.19'
[Mon May 28 11:53:58 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:53:58 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Mon May 28 11:53:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.864
[Mon May 28 11:53:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.53"
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3.csv
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3.csv
[Mon May 28 12:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 12:07:02 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 28 12:26:30 2012] Spatial fit model total counts = 176.922000, observed total counts = 178.000000
[Mon May 28 12:26:30 2012] Offset between fit and detection position for source 4 = 0.352974 pixels
[Mon May 28 12:26:30 2012] 175.870000 total counts/ 115.057000 bgd. counts: snr = 5.669437
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.352974 pixels
  Position = (245.5, 231.5) = 11 38 43.64 3 15 37.5
  Extent = 9.8 (6.6-13.9)", rotation angle = 0
  Source counts = 60.8 +/- 13.3
  Background counts = 115.1
  Rate = 0.005 +/- 0.001
[Mon May 28 12:26:30 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:26:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:26:30 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:26:30 2012] Source does appear to be extended
[Mon May 28 12:26:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:27:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 14:27:50 2012] Initial guess for spatial extent in simple fitting = 9.76"
[Mon May 28 14:27:50 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.830
[Mon May 28 14:27:50 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.76"
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 14:33:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3.csv
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 14:33:17 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3.csv
[Mon May 28 14:33:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 14:33:17 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 28 14:38:46 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Mon May 28 14:38:46 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:38:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:38:46 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:38:46 2012] Source does appear to be extended
[Mon May 28 14:38:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 16:22:21 2012] XMMSAS src. selection expression = ellipse(21312.978600, 20092.664200, 585.769217, 585.769217, 0.000000, X, Y)
[Mon May 28 16:22:21 2012] Writing source region out to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4_src.reg
[Mon May 28 16:22:21 2012] Extracting stamp from image fullrun_mos1_xmm0111970701_pi300-10000_cl_sm2.00.img.gz, (212, 198) - (279, 265)
[Mon May 28 16:22:21 2012] XMMSAS bgd. selection expression = annulus(21312.978600, 20092.664200, 976.282028, 1952.564056, X, Y)
[Mon May 28 16:22:21 2012] Writing fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4.gif
[Mon May 28 16:24:38 2012] Mean detx,y = (-4907.78, -7930.18) 
[Mon May 28 16:24:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:24:53 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:24:53 2012] Setting source spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 28 16:24:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 28 16:33:35 2012] Not generating rmf since there are only 60 counts
[Mon May 28 16:33:35 2012] rmf not generated due to insufficient counts
[Mon May 28 16:40:04 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:04 2012] Error reading totcts from fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 28 16:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:04 2012] Using photon index=1.80, rate=0.00495, arf fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src4.arf
[Mon May 28 16:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:04 2012] Updating source flux to 8.9e-14
[Mon May 28 16:40:06 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting