[Mon May 28 10:09:46 2012] Detection parameters:
  Position = (303.5, 320.8) = 11 38 26.81 3 22 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14858.1 +/- 145.8
  Background counts = 7.1
  Rate = 1 +/- 0.01

[Mon May 28 10:09:47 2012] Off-axis axis estimate = 1.66'
[Mon May 28 11:53:58 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:53:58 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon May 28 11:53:58 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Mon May 28 11:53:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 12:07:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1.csv
[Mon May 28 12:07:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 12:07:02 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 12:07:02 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 12:26:30 2012] Spatial fit model total counts = 12757.000000, observed total counts = 12757.000000
[Mon May 28 12:26:30 2012] Offset between fit and detection position for source 2 = 0.237290 pixels
[Mon May 28 12:26:30 2012] 12764.610000 total counts/ 2720.410000 bgd. counts: snr = 192.574230
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.237290 pixels
  Position = (303.3, 320.7) = 11 38 26.87 3 22 5.3
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 10044.2 +/- 113.0
  Background counts = 2720.4
  Rate = 0.8 +/- 0.009
[Mon May 28 12:26:30 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:26:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:26:30 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:26:30 2012] Source does appear to be extended
[Mon May 28 12:26:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 14:27:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 14:27:50 2012] Initial guess for spatial extent in simple fitting = 5.43"
[Mon May 28 14:27:50 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.735
[Mon May 28 14:27:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 14:33:17 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 14:33:17 2012] fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 14:33:17 2012] Fit fullrun_mos1_xmm0111970701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 14:38:46 2012] Spatial fit model total counts = 12759.000000, observed total counts = 12759.000000
[Mon May 28 14:38:46 2012] Offset between fit and detection position for source 2 = 0.011510 pixels
[Mon May 28 14:38:46 2012] 12806.800000 total counts/ 2716.000000 bgd. counts: snr = 193.624681
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011510 pixels
  Position = (303.3, 320.6) = 11 38 26.87 3 22 5.2
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 10090.8 +/- 113.2
  Background counts = 2716.0
  Rate = 0.8 +/- 0.009
[Mon May 28 14:38:46 2012] Vigneting correction estimate = 1.000000
[Mon May 28 14:38:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 14:38:46 2012] Assessing source extent using major axis lower bound
[Mon May 28 14:38:46 2012] Source does appear to be extended
[Mon May 28 14:38:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 16:22:21 2012] Counts = 10090.800000, rescaling region sizes by 3.000000
[Mon May 28 16:22:21 2012] XMMSAS src. selection expression = ellipse(26335.826800, 27847.663000, 983.735029, 983.735029, 0.000000, X, Y)
[Mon May 28 16:22:21 2012] Writing source region out to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 16:22:21 2012] Extracting stamp from image fullrun_mos1_xmm0111970701_pi300-10000_cl_sm2.00.img.gz, (247, 264) - (360, 377)
[Mon May 28 16:22:21 2012] XMMSAS bgd. selection expression = annulus(26335.826800, 27847.663000, 4918.675144, 9837.350287, X, Y) && !ellipse(23880.882560, 37324.485800, 342.008810, 342.008810, 0.000000, X, Y) && !ellipse(21312.978600, 20092.664200, 781.025622, 781.025622, 0.000000, X, Y) && !ellipse(33254.939636, 19275.117844, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 16:22:21 2012] Writing fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2.gif
[Mon May 28 16:22:24 2012] Mean detx,y = (192.52, -208.82) 
[Mon May 28 16:22:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:24:26 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:24:26 2012] Setting source spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 16:24:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 16:40:04 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:04 2012] Error reading totcts from fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 16:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:04 2012] Using photon index=1.80, rate=0.822, arf fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2.arf
[Mon May 28 16:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:04 2012] Updating source flux to 7.7e-12
[Mon May 28 16:40:18 2012] Reading fit data from xmm0111970701/analysis//spectral/fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_pl.csv
[Mon May 28 16:40:18 2012] Spectral fit parameter nH value = 9.40773e+20
[Mon May 28 16:40:18 2012] Spectral fit parameter PhoIndex value = 2.10875
[Mon May 28 16:40:18 2012] Failed to get F(0.3-8.0) from xmm0111970701/analysis//spectral/fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon May 28 16:40:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:18 2012] Using Nh = 9.4e+20, photon index=2.11, rate=0.822, arf fullrun_mos1_xmm0111970701_pi300-10000_pass1_cl_src2.arf
[Mon May 28 16:40:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:18 2012] Updating source flux to 7.2e-12