[Sun Sep 2 09:36:23 2012] Detection parameters: Position = (246.3, 317.2) = 4 10 0.50 -71 14 42.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 67.1 +/- 12.2 Background counts = 19.0 Rate = 0.006 +/- 0.001 [Sun Sep 2 09:36:23 2012] Off-axis axis estimate = 4.02' [Sun Sep 2 09:37:46 2012] Using EEF radius (= 8.44 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 09:37:46 2012] Initial guess for spatial extent in simple fitting = 8.44" [Sun Sep 2 09:37:46 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.050 [Sun Sep 2 09:37:46 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.44" [Sun Sep 2 11:40:32 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25.ximg exists [Sun Sep 2 11:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25.csv [Sun Sep 2 11:40:32 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25_1.ximg exists [Sun Sep 2 11:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25.csv [Sun Sep 2 11:40:32 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 2 11:40:33 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Sun Sep 2 11:40:33 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Sun Sep 2 11:40:33 2012] Fit fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Sun Sep 2 13:07:46 2012] Spatial fit model total counts = 344.146000, observed total counts = 343.000000 [Sun Sep 2 13:07:46 2012] Offset between fit and detection position for source 25 = 6.870814 pixels [Sun Sep 2 13:07:46 2012] 343.852000 total counts/ 190.820000 bgd. counts: snr = 11.078228 Spatial fit parameters: Offset between fit and detection position for source 25 = 6.870814 pixels Position = (240.7, 321.3) = 4 10 5.46 -71 14 26.0 Extent = 16.9 (16.8-33.8)", rotation angle = 0 Source counts = 153.0 +/- 18.5 Background counts = 190.8 Rate = 0.01 +/- 0.001 [Sun Sep 2 13:07:47 2012] Vigneting correction estimate = 1.000000 [Sun Sep 2 13:07:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Sep 2 13:07:47 2012] Assessing source extent using major axis lower bound [Sun Sep 2 13:07:47 2012] Source does appear to be extended [Sun Sep 2 13:07:47 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Sep 2 13:07:47 2012] Source is confused with source 22 [Sun Sep 2 13:08:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Sep 2 13:08:10 2012] Initial guess for spatial extent in simple fitting = 16.88" [Sun Sep 2 13:08:10 2012] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.056 [Sun Sep 2 13:08:10 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 16.88" [Sun Sep 2 15:43:56 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23.ximg exists [Sun Sep 2 15:43:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23.csv [Sun Sep 2 15:43:56 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23_1.ximg exists [Sun Sep 2 15:43:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23.csv [Sun Sep 2 15:43:56 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 2 15:43:57 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Sun Sep 2 15:43:57 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Sun Sep 2 15:43:57 2012] Fit fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly [Sun Sep 2 17:07:21 2012] Warning, spatial fit 23 centroid is now closest to src. 18 [Sun Sep 2 17:07:21 2012] Source 25 is offset by -6.303190 and 4.708123 pixels which is larger than 2 X fitted extent = 7.465563 x 3.176775, not incorporating fit results [Sun Sep 2 17:07:21 2012] Vigneting correction estimate = 1.000000 [Sun Sep 2 17:07:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Sep 2 17:07:21 2012] Assessing source extent using major axis lower bound [Sun Sep 2 17:07:21 2012] Source does appear to be extended [Sun Sep 2 17:07:21 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Sep 2 17:07:38 2012] XMMSAS src. selection expression = ellipse(20896.202000, 27901.716000, 1012.608029, 1012.608029, 0.000000, X, Y) [Sun Sep 2 17:07:38 2012] Writing source region out to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25_src.reg [Sun Sep 2 17:07:38 2012] Extracting stamp from image fullrun_pn_xmm0111970301_pi300-10000_cl_sm2.00.img.gz, (183, 263) - (299, 379) [Sun Sep 2 17:07:38 2012] XMMSAS bgd. selection expression = annulus(20896.202000, 27901.716000, 1687.680049, 3375.360097, X, Y) && !ellipse(15026.444000, 32134.902000, 3455.552099, 3455.552099, 0.000000, X, Y) && !ellipse(16187.116000, 31354.798000, 1727.776050, 1727.776050, 0.000000, X, Y) && !ellipse(16747.909622, 31010.038025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17448.724518, 30495.920807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17895.986000, 30136.198000, 1670.328048, 1670.328048, 0.000000, X, Y) && !ellipse(18682.729200, 29542.201880, 3195.216092, 409.593612, 217.525000, X, Y) && !ellipse(19902.612000, 28576.866000, 2700.288078, 2700.288078, 0.000000, X, Y) && !ellipse(20515.892000, 28112.646000, 3014.832087, 3014.832087, 0.000000, X, Y) && !ellipse(22031.955566, 27087.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23418.950000, 25947.552000, 2309.392066, 2309.392066, 0.000000, X, Y) && !ellipse(24276.806000, 25321.642000, 1154.696033, 1154.696033, 0.000000, X, Y) && !ellipse(22073.512200, 24229.973200, 465.334413, 465.334413, 0.000000, X, Y) [Sun Sep 2 17:07:38 2012] Writing fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25.gif [Sun Sep 2 17:28:32 2012] Mean detx,y = (363.54, 6667.82) [Sun Sep 2 17:28:35 2012] Setting backscal keywords in source and bgd. spectrum [Sun Sep 2 17:29:01 2012] grppha failed [Sun Sep 2 17:29:02 2012] Setting source spectrum file to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25_src.pi.gz [Sun Sep 2 17:29:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25_bgd.pi.gz [Sun Sep 2 17:55:37 2012] Updating aperture counts using extracted products [Sun Sep 2 17:55:37 2012] Error reading totcts from fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25_src.pi.gz [Sun Sep 2 17:55:37 2012] No arf file for this source, not re-computing flux [Sun Sep 2 17:55:41 2012] Flag b found in src. 25 procflags, skipping spectral fitting [Sun Sep 2 17:55:41 2012] Flag c found in src. 25 procflags, skipping spectral fitting [Sun Sep 2 17:55:41 2012] Source 25 has no response, skipping [Sun Sep 2 17:55:42 2012] xmm0111970301/analysis//spectral/fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete