[Sun Sep  2 09:36:22 2012] Detection parameters:
  Position = (300.8, 276.3) = 4 9 11.29 -71 17 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37321.6 +/- 230.9
  Background counts = 20.2
  Rate = 3 +/- 0.02

[Sun Sep  2 09:36:23 2012] Off-axis axis estimate = 1.62'
[Sun Sep  2 09:37:46 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 09:37:46 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Sep  2 09:37:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Sep  2 09:37:46 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.24"
[Sun Sep  2 11:40:32 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2.ximg exists
[Sun Sep  2 11:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2.csv
[Sun Sep  2 11:40:32 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Sep  2 11:40:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2.csv
[Sun Sep  2 11:40:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 11:40:33 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Sep  2 11:40:33 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Sep  2 11:40:33 2012] Fit fullrun_pn_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Sep  2 13:07:46 2012] Spatial fit model total counts = 32537.100000, observed total counts = 32502.000000
[Sun Sep  2 13:07:46 2012] Offset between fit and detection position for source 2 = 0.267409 pixels
[Sun Sep  2 13:07:46 2012] 32690.690000 total counts/ 6383.290000 bgd. counts: snr = 329.272636
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.267409 pixels
  Position = (300.7, 276.5) = 4 9 11.41 -71 17 41.2
  Extent = 5.9 (5.9-6.0)", rotation angle = 0
  Source counts = 26307.4 +/- 180.8
  Background counts = 6383.3
  Rate = 2 +/- 0.01
[Sun Sep  2 13:07:47 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 13:07:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 13:07:47 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 13:07:47 2012] Source does appear to be extended
[Sun Sep  2 13:07:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 13:08:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 13:08:10 2012] Initial guess for spatial extent in simple fitting = 5.91"
[Sun Sep  2 13:08:10 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.869
[Sun Sep  2 13:08:10 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.91"
[Sun Sep  2 15:43:55 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src2.ximg exists
[Sun Sep  2 15:43:55 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Sep  2 15:43:55 2012] Fit fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Sep  2 15:43:56 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Sep  2 15:43:56 2012] fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Sep  2 15:43:56 2012] Fit fullrun_pn_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Sep  2 17:07:21 2012] Spatial fit model total counts = 32495.500000, observed total counts = 32502.000000
[Sun Sep  2 17:07:21 2012] Offset between fit and detection position for source 2 = 0.000082 pixels
[Sun Sep  2 17:07:21 2012] 32647.580000 total counts/ 6359.880000 bgd. counts: snr = 329.631062
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000082 pixels
  Position = (300.7, 276.5) = 4 9 11.41 -71 17 41.2
  Extent = 5.9 (5.9-6.0)", rotation angle = 0
  Source counts = 26287.7 +/- 180.7
  Background counts = 6359.9
  Rate = 2 +/- 0.01
[Sun Sep  2 17:07:21 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:07:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:07:21 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:07:21 2012] Source does appear to be extended
[Sun Sep  2 17:07:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:07:21 2012] Source is confused with source 36
[Sun Sep  2 17:07:37 2012] Counts = 26287.700000, rescaling region sizes by 3.000000
[Sun Sep  2 17:07:37 2012] XMMSAS src. selection expression = ellipse(26109.886200, 24007.046800, 1063.238431, 1063.238431, 0.000000, X, Y)
[Sun Sep  2 17:07:37 2012] Writing source region out to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2_src.reg
[Sun Sep  2 17:07:37 2012] Extracting stamp from image fullrun_pn_xmm0111970301_pi300-10000_cl_sm2.00.img.gz, (240, 215) - (362, 338)
[Sun Sep  2 17:07:37 2012] XMMSAS bgd. selection expression = annulus(26109.886200, 24007.046800, 5316.192153, 10632.384306, X, Y) && !ellipse(34541.399567, 34735.766296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15026.444000, 32134.902000, 3455.552099, 3455.552099, 0.000000, X, Y) && !ellipse(16187.116000, 31354.798000, 1727.776050, 1727.776050, 0.000000, X, Y) && !ellipse(16747.909622, 31010.038025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.463531, 30653.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17448.724518, 30495.920807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.887000, 30426.132000, 1045.008030, 1045.008030, 0.000000, X, Y) && !ellipse(17895.986000, 30136.198000, 1670.328048, 1670.328048, 0.000000, X, Y) && !ellipse(27133.546570, 29295.027161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18682.729200, 29542.201880, 3195.216092, 409.593612, 217.525000, X, Y) && !ellipse(19902.612000, 28576.866000, 2700.288078, 2700.288078, 0.000000, X, Y) && !ellipse(26771.023560, 28324.874146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34754.938263, 28383.069733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.756104, 28097.245209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20515.892000, 28112.646000, 3014.832087, 3014.832087, 0.000000, X, Y) && !ellipse(26321.750122, 27535.780853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20896.202000, 27901.716000, 1350.144039, 1350.144039, 0.000000, X, Y) && !ellipse(22031.955566, 27087.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23418.950000, 25947.552000, 2309.392066, 2309.392066, 0.000000, X, Y) && !ellipse(24276.806000, 25321.642000, 1154.696033, 1154.696033, 0.000000, X, Y) && !ellipse(25573.310000, 24271.832000, 1131.312033, 1131.312033, 0.000000, X, Y) && !ellipse(22073.512200, 24229.973200, 465.334413, 465.334413, 0.000000, X, Y) && !ellipse(28024.754944, 23930.463470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21200.911484, 23313.676270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33794.067230, 22865.443604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21601.791400, 22363.980800, 454.195213, 454.195213, 0.000000, X, Y) && !ellipse(34672.117279, 22114.181824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17758.206680, 21885.412552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27017.032580, 20866.997000, 455.358413, 455.358413, 0.000000, X, Y) && !ellipse(36790.549225, 13270.463760, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 17:07:37 2012] Writing fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2.gif
[Sun Sep  2 17:10:01 2012] Mean detx,y = (354.07, 178.58) 
[Sun Sep  2 17:10:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 17:12:44 2012] grppha failed
[Sun Sep  2 17:12:44 2012] Setting source spectrum file to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Sep  2 17:12:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep  2 17:55:37 2012] Updating aperture counts using extracted products
[Sun Sep  2 17:55:37 2012] Error reading totcts from fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Sep  2 17:55:37 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 17:55:41 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Sep  2 17:55:41 2012] Source 2 has no response, skipping
[Sun Sep  2 17:55:42 2012] xmm0111970301/analysis//spectral/fullrun_pn_xmm0111970301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete