[Sun Sep  2 09:36:50 2012] Detection parameters:
  Position = (455.3, 293.2) = 4 6 51.70 -71 16 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.8 +/- 8.4
  Background counts = 6.5
  Rate = 0.002 +/- 0.0004

[Sun Sep  2 09:36:50 2012] Off-axis axis estimate = 11.38'
[Sun Sep  2 12:19:38 2012] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 12:19:38 2012] Initial guess for spatial extent in simple fitting = 12.12"
[Sun Sep  2 12:19:38 2012] source mask rpix=2.8, npix_max = 43, mask sum = 40, frac = 0.926
[Sun Sep  2 12:19:38 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.12"
[Sun Sep  2 13:07:29 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19.ximg exists
[Sun Sep  2 13:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19.csv
[Sun Sep  2 13:07:29 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Sep  2 13:07:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19.csv
[Sun Sep  2 13:07:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 13:07:30 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Sep  2 13:07:30 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Sep  2 13:07:30 2012] Fit fullrun_mos2_xmm0111970301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Sep  2 13:07:58 2012] Spatial fit model total counts = 194.515000, observed total counts = 193.000000
[Sun Sep  2 13:07:58 2012] Offset between fit and detection position for source 13 = 2.923311 pixels
[Sun Sep  2 13:07:58 2012] 176.590100 total counts/ 77.913500 bgd. counts: snr = 11.179125
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.923311 pixels
  Position = (457.9, 294.6) = 4 6 49.43 -71 16 18.9
  Extent = 21.2 (15.1-24.2)", rotation angle = 0
  Source counts = 98.7 +/- 13.3
  Background counts = 77.9
  Rate = 0.005 +/- 0.0007
[Sun Sep  2 13:07:58 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 13:07:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 13:07:58 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 13:07:58 2012] Source does appear to be extended
[Sun Sep  2 13:07:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 13:07:58 2012] Source is confused with source 6
[Sun Sep  2 16:14:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 16:14:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 16:14:57 2012] Initial guess for spatial extent in simple fitting = 21.19"
[Sun Sep  2 16:14:57 2012] source mask rpix=4.9, npix_max = 115, mask sum = 115, frac = 0.996
[Sun Sep  2 16:14:57 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 21.19"
[Sun Sep  2 17:07:10 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19.ximg exists
[Sun Sep  2 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19.csv
[Sun Sep  2 17:07:10 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Sep  2 17:07:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19.csv
[Sun Sep  2 17:07:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:07:11 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Sep  2 17:07:11 2012] fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Sep  2 17:07:11 2012] Fit fullrun_mos2_xmm0111970301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Sep  2 17:07:28 2012] Warning, spatial fit 19 centroid is now closest to src. 12
[Sun Sep  2 17:07:28 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:07:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:07:28 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:07:28 2012] Source does appear to be extended
[Sun Sep  2 17:07:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:48:27 2012] XMMSAS src. selection expression = ellipse(39785.414000, 25584.433800, 1271.490037, 1271.490037, 0.000000, X, Y)
[Sun Sep  2 17:48:27 2012] Writing source region out to fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13_src.reg
[Sun Sep  2 17:48:27 2012] Extracting stamp from image fullrun_mos2_xmm0111970301_pi300-10000_cl_sm2.00.img.gz, (385, 222) - (531, 368)
[Sun Sep  2 17:48:27 2012] XMMSAS bgd. selection expression = annulus(39785.414000, 25584.433800, 2119.150061, 4238.300122, X, Y) && !ellipse(40292.776000, 25462.142000, 2020.848058, 1247.560036, 322.436000, X, Y) && !ellipse(40799.274414, 26019.735229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40418.230600, 25474.988000, 2144.296062, 1236.344036, 314.169000, X, Y) && !ellipse(42137.121200, 20026.350000, 1739.144050, 344.602410, 91.033902, X, Y)
[Sun Sep  2 17:48:27 2012] Writing fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13.gif
[Sun Sep  2 17:52:03 2012] Mean detx,y = (9350.88, 9801.02) 
[Sun Sep  2 17:52:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 17:52:55 2012] grppha failed
[Sun Sep  2 17:52:55 2012] Setting source spectrum file to fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13_src.pi.gz
[Sun Sep  2 17:52:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Sep  2 17:55:10 2012] Not generating rmf since there are only 98 counts
[Sun Sep  2 17:55:10 2012] rmf not generated due to insufficient counts
[Sun Sep  2 17:55:38 2012] Updating aperture counts using extracted products
[Sun Sep  2 17:55:38 2012] Error reading totcts from fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13_src.pi.gz
[Sun Sep  2 17:55:38 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 17:55:40 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Sun Sep  2 17:55:40 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep  2 17:55:41 2012] xmm0111970301/analysis//spectral/fullrun_mos2_xmm0111970301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete