[Sun Jun 23 20:53:03 2013] Detection parameters:
  Position = (128.5, 353.1) = 22 50 41.77 -27 3 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.0 +/- 10.7
  Background counts = 2.2
  Rate = 0.006 +/- 0.0009

[Sun Jun 23 20:53:04 2013] Off-axis axis estimate = 12.94'
[Sun Jun 23 21:32:12 2013] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 21:32:12 2013] Initial guess for spatial extent in simple fitting = 12.90"
[Sun Jun 23 21:32:12 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.020
[Sun Jun 23 21:32:12 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.90"
[Sun Jun 23 21:53:32 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 23 21:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 21:53:32 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 23 21:53:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 21:53:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 21:53:32 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 23 21:53:32 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 23 21:53:32 2013] Fit fullrun_mos1_xmm0111970101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jun 23 22:09:12 2013] Spatial fit model total counts = 86.528000, observed total counts = 89.000000
[Sun Jun 23 22:09:12 2013] Offset between fit and detection position for source 3 = 1.116281 pixels
[Sun Jun 23 22:09:12 2013] 84.529500 total counts/ 16.975400 bgd. counts: snr = 16.396143
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.116281 pixels
  Position = (129.0, 354.1) = 22 50 41.61 -27 3 42.8
  Extent = 8.6 (6.4-11.1)", rotation angle = 0
  Source counts = 67.6 +/- 9.2
  Background counts = 17.0
  Rate = 0.005 +/- 0.0007
[Sun Jun 23 22:09:12 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 22:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 22:09:12 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 22:09:12 2013] Source does appear to be extended
[Sun Jun 23 22:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 22:44:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 22:44:37 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Sun Jun 23 22:44:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Sun Jun 23 22:44:37 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.63"
[Sun Jun 23 22:58:40 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 23 22:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 22:58:40 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 23 22:58:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3.csv
[Sun Jun 23 22:58:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 22:58:40 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 23 22:58:40 2013] fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 23 22:58:40 2013] Fit fullrun_mos1_xmm0111970101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 23 23:10:46 2013] Spatial fit model total counts = 79.745300, observed total counts = 84.000000
[Sun Jun 23 23:10:46 2013] Offset between fit and detection position for source 3 = 0.130018 pixels
[Sun Jun 23 23:10:46 2013] 79.847900 total counts/ 10.956500 bgd. counts: snr = 20.812732
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.130018 pixels
  Position = (129.0, 354.0) = 22 50 41.62 -27 3 43.4
  Extent = 8.8 (6.6-11.3)", rotation angle = 0
  Source counts = 68.9 +/- 8.9
  Background counts = 11.0
  Rate = 0.005 +/- 0.0007
[Sun Jun 23 23:10:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 23:10:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 23:10:46 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 23:10:46 2013] Source does appear to be extended
[Sun Jun 23 23:10:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 23:29:35 2013] XMMSAS src. selection expression = ellipse(11172.075080, 30748.071600, 525.830415, 525.830415, 0.000000, X, Y)
[Sun Jun 23 23:29:35 2013] Writing source region out to fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 23 23:29:35 2013] Extracting stamp from image fullrun_mos1_xmm0111970101_pi300-10000_cl_sm2.00.img.gz, (99, 324) - (159, 384)
[Sun Jun 23 23:29:35 2013] XMMSAS bgd. selection expression = annulus(11172.075080, 30748.071600, 876.384025, 1752.768050, X, Y) && !ellipse(12087.775650, 30317.664795, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 23:29:35 2013] Writing fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3.gif
[Sun Jun 23 23:30:08 2013] Mean detx,y = (-2263.47, -16841.79) 
[Sun Jun 23 23:30:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 23:30:19 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 23:30:19 2013] Setting source spectrum file to fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 23 23:30:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 23 23:36:44 2013] Not generating rmf since there are only 68 counts
[Sun Jun 23 23:36:44 2013] rmf not generated due to insufficient counts
[Sun Jun 23 23:42:56 2013] Updating aperture counts using extracted products
[Sun Jun 23 23:42:56 2013] Total counts from fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 76.00
[Sun Jun 23 23:42:56 2013] Total counts from fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 30.00
[Sun Jun 23 23:42:56 2013] Got source and background scale factors 798282.000000, 2582008.000000
[Sun Jun 23 23:42:56 2013] User source parameters:
  Position = (129.0, 354.0) = 22 50 41.62 -27 3 43.4
  Extent = 8.8 (6.6-11.3)", rotation angle = 0
  Source aperture counts = 66.7 +/- 9.8
  Background aperture counts = 9.3
  Rate = 0.005 +/- 0.0008

[Sun Jun 23 23:42:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 23:42:57 2013] Using photon index=1.80, rate=0.00546, arf fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 23 23:42:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 23:42:57 2013] Updating source flux to 2.3e-13
[Sun Jun 23 23:42:59 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 23:43:00 2013] xmm0111970101/analysis//spectral/fullrun_mos1_xmm0111970101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete